Rode Universal Blimp Mount

14

Mount Adapter

  • Compact and lightweight mount adapter for Blimp-basket windscreen boom pole (replaces the factory-mounted handle)
  • 3/8" threaded receptacle
  • Weight: 60 g
Produkt dostępny od Listopad 2013
Numer artykułu 328359
Jednostka sprzedaży 1 szt.
53 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Środa, 24.04. and Czwartek, 25.04.
1

14 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

8 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Good mount!
Anonimowy 22.04.2016
As Rode Blimp is a good protection against wind it's not always that people want to use it by hand. I make atmosphere recordings and with Blimps own handlebar it's quite uncomfortable to connect it to a mic stand. Since I got this mount Blimp takes much less room and connecting it to a mic stand is easier too. It's also quite nice that it has hole for 3/8" screw and it doesn't need an adapter - like most mic holders do.
obsługa
właściwości
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
G
Ghpics 17.01.2021
Found that you can't use the patch cable from the blimp with this so have to remove it and just use a regular XLR straight to the mic inside the blimp. Other than that great lightweight alternative to the handle for use on a pole
obsługa
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
r
Sinnvolle Ergänzung zum fairen Preis
radiofox 15.12.2013
Wenn man den Røde-Blimp an einer Tonangel benutzt, ist die Anschaffung dieses Adapters quasi verpflichtend. Am Ende einer meterlangen Stange macht sich der Gewichtsunterschied zum Pistolengriff schnell positiv bemerkbar. Die Verarbeitung ist einwandfrei: es ist die gleiche Neigungsjustierung mit Feststellklemme aus Metall verbaut, wie man sie vom Pistolengriff kennt.

Der Tausch von Pistolengriff gegen den Universal Mount ist zunächst gewöhnungsbedürftig, da die Verbindungsschraube konstruktiv bedingt am Blimp verbleibt und man plötzlich die lose Rändelmutter und eine Zwischenscheibe in der Hand hat, die man dann in den Universal Mount einsetzen muss (das erste mal also vielleicht besser nicht bei Außenaufnahmen in hohem Gras umbauen...). Nach ein, zwei Versuchen bekommt man das aber innerhalb von 15 Sekunden hin.
obsługa
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie