Schaller Stop Tailpiece BC

33

Tailpiece for Electric Guitar

  • Total string spacing: 51.5 mm
  • Single string spacing: 10.3 mm
  • String radius: 12" (305 mm)
  • Total hole/bolt spacing : 81 mm
  • Dimensions (L x W x H): 101.2 x 17.8 x 12.5 mm
  • Finish: Black Chrome
  • Schaller No. 12050400
  • Includes 2 impact sleeves 7.93 mm (5/16") with 2 height adjustment screws 7.93 mm (5/16")
  • Made in Germany
Produkt dostępny od Luty 2005
Numer artykułu 176442
Jednostka sprzedaży 1 szt.
Colour Black
Design Stop Tailpiece
Finetuner No
Incl. Bridge No
222 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 19.04.
1

33 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

15 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Schaller - TOP quality
Anonimowy 07.08.2016
Schaller products are top quality, very accurate. As I built my dream guitar, it was very important to have all details in high quality, therefore I chose this Schaller tailpiece and some other details from Schaller as well. I would definitely recommend this tailpiece to everyone who is concerned about quality of the product.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
AF
Nice quality but the bushings are small and not universal-threaded
Andy Fereday 10.02.2022
I found this stop tailpiece to be a nice quality - the powder coating was uniform and there's a good weight to it. I bought it to replace an existing bridge but found the bushings were noticeably smaller. The thread in the posts was tighter than the thread in the existing bushings, so I couldn't simply switch out the posts as they didn't fit.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
m
Not as good as epiphone stop tail
meelo 28.08.2019
This stop tail doesn't lock into the installation pegs while strings are off, so this drops off very easily when strings are entirely removed for more comprehensive cleaning.

Installation pegs were also too short for the original holes I had in Epiphone SG, so I had to install the stop tail quite low compared to the old one. Would be nice if Schaller had extra selection of installation pegs for this and their bridges.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
e
Great quality
emmanuelrmx 26.03.2021
Nice finish and great quality, works good.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie