SPL Reducer

101

Passive Attenuator for Guitar Amplifier

  • Choosable Impedance for amp output: 4, 8 or 16 Ohm
  • Input/output: 6.35 mm mono jack
  • Dimensions (HxWxD): 85 x 208 x 179 mm (incl. feet and switches/ knobs)
  • Weight: 1.8 kg

Max. Eingangsleistung:

  • 4 Ohm: 90 W RMS/ 120 W peak
  • 8 Ohm: 200 W RMS/ 260 W peak
  • 16 Ohm: 160 W RMS/ 180 W peak
Produkt dostępny od Maj 2011
Numer artykułu 266766
Jednostka sprzedaży 1 szt.
Impedance 4, 8, 16
Noise Supression No
DI Interface No
Speaker Simulation No
Dummy Load (usable without cabinet) No
Dostępny B-Stock od 1 545 zł
1 799 zł
Ceny z podatkiem VAT
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Darmowa dostawa spodziewana pomiędzy Środa, 24.04. a Czwartek, 25.04.
1

101 Oceny klientów

4.4 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

właściwości

dźwięk

wykończenie

58 Opinie

M
Bardzo dobry tłumik
MariuszWladyslaw 22.08.2022
Jest to już mój trzeci attenuator i najprawdopodobniej ostatni, gdyż wreszcie trafiłem na urządzenie, które mnie zadowala. Jest transparentny w całym zakresie wyciszenia. Dźwięk nie jest zamulony, przynajmniej ja tego nie słyszę. Co ważne, posiada "true bypass", który działa bez zarzutu, dźwięk jest taki sam, jak bez podłączenia tłumika.
Tego mi brakowało w poprzednich urządzeniach. A najbardziej przekonało mnie do zakupu to, że posiada tylko funkcję, która jest mi potrzebna, czyli zmniejszenie głośności bez utraty jakości. Płacę tylko za to, czego potrzebuję, żadne dwa czy trzy w jednym. Dla mnie akurat to wielka zaleta.
Urządzenie od momentu podłączenia działa bez zarzutu. Nie było najmniejszych kłopotów.
Także wygląd zewnętrzny nie budzi zastrzeżeń, wykonanie solidne i estetyczne, ładna kolorystyka. I, co mnie także przekonało do zakupu, jest "Made in Germany".
Niezbyt jestem zadowolony z tego, że przełącznik zmiany oporności ( 4, 8 i 16 omów ) jest umieszczony na czołowej płytce tuż obok pokrętła głośności, gdyż obawiam się, abym kiedyś się nie pomylił. Dlatego tylko jest jedna gwiazdka mniej dla właściwości.
Niemniej jednak, jestem bardzo zadowolony z zakupu, aczkolwiek cena jest dosyć wysoka i zastanawiałem się przed kupnem. Ale nie żałuję. Mogę żałować jedynie tego, że nie kupiłem go od razu. Uniknąłbym odsprzedawania ze stratą poprzednio zakupionych tłumików.
właściwości
dźwięk
wykończenie
0
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
S
JMP MARSHALL-SPL REDUCER-2 SPEAKER G12 65 CELESTION
Simspajt 21.03.2019
I have a Marshall JMP 2203 Master Model Lead 100w Mk2 from 1979 with two 65W speakers and on club gigs and at rehersals was way too loud. That kind off amps start to perform best at 3/4, i used to play at 1/4 or less. USED TO!!!
With SPL REDUCER i finally have true hot tube sound of this excellent amp even in my house. I have SPL for two days and as far i played with it I think its really minimal change of sound even at bedroom level. Check yourself some videos about SPL and you will see like i did. Its great it is pasive. It gets hot so have a beer and your fingers away and wait until tubes and SPL cool down.

It looks very cool, solid. Considering the impedance setting knob is at front panel near two other volume knobs, be carefull not to change them in the dark. Don't set impedance while operating!!! I put some tape across it for safety!

If lost i would buy another!!!
właściwości
dźwięk
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
D
The best guitar attenuator I have found on the market at the moment!
David5140 04.06.2014
This is a passive attenuator which does not alter the guitar's tone unlike active attenuators do.
It is very simple and easy to use and the minimal features may also preserve the guitar's tone, just like a simple guitar amp when compared to a more complex amp.
Also, it can attenuate up to 200W of power (for 8 ohm cabinets) which is one of the most powerful I've come across on the market.
I was considering getting an other type of attenuator which uses a speaker motor and is said to be even more transparent on tone but SPL's professional site and informative video demos on YouTube convinced me to make the choice to get this attenuator instead.
I also want to mention that SPL have a very helpful service and will answer all your questions.
Personally, I will order a second copy of this model because I have two cabinets. I could use one attenuator for both but two would handle the power more easily and the amplifier's master volume could be set higher, allowing for more power tube tone and even saturation, if desired.
As for features, it's all on the item info page; for example, variable resistance for use with different amps and the text at the back is printed both upright and inverted, for easy reading when it is connected and you want to read the connection info! Very good idea!
właściwości
dźwięk
wykończenie
2
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
g
Simple but sounds good!
gringopig 23.01.2021
It's a passive attenuator with impedance switch. Nothing fancy and no reactive load features. However, it sounds great!
Makes me wonder about spending so much on a reactive attenuator to be honest now. Even on the high attenuation settings, the unit still let's the amp and guitar shine through. Love it so far!
właściwości
dźwięk
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat