Strymon Multiswitch

12

Footswitch

  • For Timeline, BigSky and Mobius
  • Loop control mode (only for timeline)
  • Bank mode
  • Preset mode
  • Tap mode
  • No additional power supply required
  • Incl. stereo jack cable
  • Made in USA
Produkt dostępny od Marzec 2015
Numer artykułu 358826
Jednostka sprzedaży 1 szt.
Type Multi Switch
LED Display Yes
PSU Connector No
Shape Floor Effects Pedal
MIDI Interface No
529 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Sobota, 30.03.
1

12 Oceny klientów

4.1 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

właściwości

wykończenie

9 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
n
Must Have For Timeline
noumena 21.11.2017
The Multiswitch does unleash your Timeline's full potential. The looper functionalities it unlocks (reverse, half speed) are great, but all the other modes are handy to have. Fits well with the main unit, beautifully crafted. Switches feel and work great.

Reserve space for the jacks of the TRS on your board. You can't line the switch up with your pedal edge to edge without turning the switch around 180. Would be also great to have Strymon consider including LEDs to go with the switches as it sometimes can be difficult to know whether you successfully started recording a loop or an overdub without feedback like that. There is a reason why the default looper mode gives you those cues. Another thing to improve would be the size of the TRS cable included with the unit, especially the jack. It takes perhaps a little too much space. At the same time, it's good that it's not running directly into the unit, and therefore one can swap to a cable with less space requirements.
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
B
Unstable for floor use
Bookerfatz2 04.10.2020
If you mount it to your pedal board it should be fine but I found myself constantly tipping it over when attempting floor use. It's very light actually. Otherwise it does what it supposed to do.
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
M
Im Prinzip gut aber nicht für jede Anwendung.
Michael665 27.05.2015
Ich habe mir den Multiswitch als Erweiterung für den im Timeline integrierten Looper gekauft. In meinem Fall möchte ich Timeline im Effektcase auf dem Tisch stehen haben, den Looper aber mit dem Fuß fernbedienen.

Dies funktioniert auch insoweit, dass die Grundfunktionen Overdub/Play/Stop automatisch auf den Multiswitch gelegt werden, sobald dieser eingesteckt ist und so lange die Looperfunktion (Stop am Timeline >5sek. halten) nicht aktiviert ist. Verwirrend ist hier, dass bei am Timeline aktivierter Loop-Funktion (es erscheint Looper im Display) nun die Funktionen der Tasten wechseln! Am Timeline selbst werden dessen drei Tasten nun zu Overdub/Play/Stop und die Multiswitch Tasten zu Reverse/Pitch/Undo, was in der Praxis schon mal verwirrend sein kann. Ich wünsche mir ein Software-Update, das dieses Verhalten deaktiviert oder noch besser - die Wahl lässt.

Der Multiswitch kippt durch seine Form gerne nach hinten und ist daher eher ungeeignet um einzeln auf dem Boden zu stehen. Ein fester Einbau neben dem Timeline in einem Effektcase auf dem Boden ist da sinnvoller (und wahrscheinlich auch so gedacht).
Trotzdem ist der Multswitch alternativlos wenn alle Looper-Funktionalitäten des Timeline genutzt werden sollen.
właściwości
wykończenie
3
0
Zgłoś nadużycie

Zgłoś nadużycie