Tascam RC-3F

105

Footswitch

  • With three pedals
  • Hands-free operation of certain Tascam products (eg GB-10, LR-10)
  • Function is determined by the controlled device
  • Battery status indicator on the bottom
  • 2.5 mm jack plug (3-pin) with 3.9 m long cable
  • Output format: UART signal (9600 bps, odd parity)
  • Power supply by means of two batteries (zinc or alkaline) or NiMH batteries of type AA
  • Power consumption: 3 mW
  • Dimensions: 190 x 32 x 122 mm
  • Weight: 0.55 kg
Produkt dostępny od Styczeń 2011
Numer artykułu 259346
Jednostka sprzedaży 1 szt.
299 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Sobota, 30.03.
1

105 Oceny klientów

4.5 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

obsługa

właściwości

wykończenie

48 Opinie

M
Tascam Footswitch
Misio 11.02.2023
Dziala przez kilka lat bez usterek, chociaz uzywam go tylko w domu kilka razy w miesiacu.
obsługa
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Anonimowy 25.02.2015
I purchased this to go with the Tascam dp32cd recorder that i also purchased from Thoman.It is of good quality and is very handy when recording and playing guitar etc.Very pleased with purchase and service from Thoman.
obsługa
właściwości
wykończenie
1
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
R
Ideal foot switch
Richard173 22.07.2016
The TascamRC-3F foot switch is just perfect for the Tascam SD20M card player! The unit is built with a sturdy construction and is large enough to see what you doing while still playing an insturment! Made up of three switches, the centre one the largest for start/ stop action and the two smaller side switches for forward and back movements. However this can be altered to function controller in the record mode, which changes the switch actions. This is procedure is activated from the SD player. A long lead is supplied with the switch which is handy! There is a battery needed to function the switch, but will last a very long time. Tascam have decided to have a red light flashing when the switch is pressed, but underside switch of the switch were one can't see it, beats me. Very good switch in design and very well thought out.
obsługa
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Makes using Tascam DP24 much easier.
Anonimowy 03.05.2015
The functions of the three switches on this pedal are set by the device it's plugged into, in my case the Tascam DP 24. It's great for jumping through your recording, punching in and out, etc. Really happy I got it, since it saves me constantly going over to the desk.

The plastic pedal part of the right switch was slightly mis-positioned. It made a click as it rubbed against another part of the device. and the travel was not the same as for the other two switches. it did, however, function as intended. I considered returning it, but I removed the base, twisted the plastic pedal part a little, and put it back together. Now the problem is fixed.

It is not a particularly rugged device, but if treated with respect I don't foresee any other problems arising. Notwithstanding the above mentioned issues, I would certainly buy it again.
obsługa
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie