t.akustik Mobile Wall

64

Foam Absorber Set

  • Consists of 3 absorber plates
  • 3-Segment stand and base plate with rubber feet
  • Material: Flexible polyurethane foam
  • Bulk density: 25.0 ± 5%
  • Compression hardness at 40% deformation: 5.0 ± 0.5 KPa
  • Tensile strength: 100 kPa minimum
  • Elongation at break: 80% minimum
  • Flame retardant in accordance with MVSS 302 (burning rate < 100 mm / min.), corresponds to DIN 4102 B3 (combustible)
  • Panel dimensions per piece: approx. 600 x 600 x 78 mm
  • Total height: 183 cm (180 cm stand + approx. 3 cm base plate with rubber feet)
  • Base plate dimensions (W x D): 55 x 29 cm
Produkt dostępny od Październik 2019
Numer artykułu 470199
Jednostka sprzedaży 1 karton(y)
Type Absorber Wall
Material Foam
Dimensions 1830 x 600 mm
Colour Anthracite
Pokaż więcej
Dostępny B-Stock od 393 zł
422 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Czwartek, 25.04.
1

64 Oceny klientów

4.4 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

45 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
JS
Easy and very versatile
Jason S Thompson 26.02.2020
I purchased three of these mobile walls to assist in sound reduction in my shared office where I do some sound recording and engineering.

These are extremely lightweight and very easy to break down and store in a small corner of my room. The pole in the middle screws together from 3 segments, so this makes it easy to store, but also makes it very flexible in terms of set-up: you can have 1, 2, or all 3 panels together at once. I've only used it as a full wall, but the option of having a smaller sound wall is cool as well.

This is a great solution for lower-budget, non-permanent needs. If you're looking for a more high-end solution for a built-out studio, then perhaps this isn't the best option for you, but I could see this working well in a live room recording area when you need to have more modular sound panels/deflectors in different areas.
wykończenie
8
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
m
Works Great
martindslr. 06.03.2022
I put one on the side on a separate tripod Then one on top and a carb board cutout with foam pieces on the back and it is working like a DIY voal both. It really keeps the sound in best bang for the buck
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
P
Great for the Price
Poonzah 07.02.2024
I use the pads nowadays on the room walls instead of the stand it came with. Very effective for attenuating high frequency ringing room reverbs.

I tried to wrap multiple of these walls around the mic, to make a semi-closed booth. But it didn't work out well. One reason is the legs are wide, which does not let getting them pretty close to each other without them stepping on each other or mic-stand / singer stepping on them.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Perfect !
JumpinJack 25.10.2021
I was looking for this for so long before coming across it here, purchased 2 of them to go behind my desk and will be ordering a third. They have helped improve my home studio where I was unable to mount acoustic foam to the walls.

Putting them together is a doddle and placement is so easy, well worth the price !
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie