the t.bone MS 200

962

Pop Filter

  • Two widely spaced fabric layers (distance: 2.5 cm)
  • Screw-on
  • With 30 cm elastic arm
  • Diameter: 15 cm (incl. Frame), 13 cm (nylon Schrim)
Produkt dostępny od Lipiec 2008
Numer artykułu 209033
Jednostka sprzedaży 1 szt.
Component type Popkiller
73 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Czwartek, 25.04.
1

962 Oceny klientów

4.2 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

427 Opinie

I
t.bone MS 200
Ivo-Music 19.06.2020
Pop filter spełnia swoje zadanie. Jedyny minus to łatwo przekręcić gwint, który trzyma pałąka. Trzeba uważać przy dokręcaniu.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

V
Jest OK
Vladimir1310 20.01.2024
Przyszłego do mnie filtr którego części nie pasowały do siebie i nie mozna było go zlozyc że względu na różne części. Skontaktowałem się z zespołem thomann i nagrałem filmik jak to wygląda. Za tydzień dostałem nowy beż żadnych problemów. Wspaniała współpraca
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
R
Good but fragile
Richard0401 31.10.2019
This dual fabric pop filter does its job really well. I could blow at my microphone and this pop filter would block all of it. Fantastic.

What is not fantastic about it is its build quality. The flexible arm thing is connected to the metal with a thread. But the thread doesn't go into the metal bit. It goes through it and you have to put a plastic washer thingy on it on the other side (I'm sorry I don't know the technical term). Thats what holds it there. Mine wouldn't screw on properly after the second time I used it. Had to keep it there with superglue.

The arm itself also feels very fragile. It makes strange noises when I move it and it isn't very solied either.


It's not the worst product, especially for the price. If you want something quick and cheap for home and you can be careful with it, this will do the trick. But if you want to be moving it around a lot and abusing it then spend more money.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
n
Does it’s job
nmdias 18.01.2020
Use:
- I use it to protect my AT2035 from the constant spitting, the pop filter feature is just a bonus.

Cons:
- This may scratch your microphone’s boom when mounting, so I placed a little piece of rubber in the thing that attaches to the boom before driving in the screw.

- It’s not very maneuverable in the beginning, and it feels like it’s gonna crack every time you adjust its position. But then again, you probably won’t adjust it very often, after it’s properly mounted. It does seem to get better with time, but also a bit looser.

On a final note:
- It’s probably a solid pop filter, considering it has dual filters, but I really wouldn't know, I actually use it more to protect the microphone from spit and breath humidity than anything else. And for that use case, it serves me perfectly.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie