the t.bone SSM 2

538

Microphone Shock Mount

  • Suitable for SC450 and similar large membrane microphones (SC 400, SC 600)
  • Diameter from 42 to 44 mm
Produkt dostępny od Maj 2002
Numer artykułu 152311
Jednostka sprzedaży 1 szt.
Colour black
43 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 17.04.
1

538 Oceny klientów

4.3 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

240 Opinie

A
Scena / Studio
Anonimowy 16.05.2016
Bardzo dobre wykonanie do tej pory wszystkie 4 kosze ktore kupilem 3 lata temu sluza mi bardzo dobrze i bezawaryjnie
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Did the job, just about
Anonimowy 13.10.2016
I had a cheap mic (AT2020 I think?), and I bought this because the 'official' shockmount was almost the same price as the mic.

It fit, and it worked reasonably well - but it was insanely tight, and incredibly difficult to open. When I first bought it, it was almost a two-man job to get a mic in it (though it did ease up a bit).

There was a small piece of felt inside, but at the opening of the ring, there's two metal tubes (which hold the spring levers you pull to open it up) which scratched the hell out of the mic. Not ideal.

On a slightly smaller mic, maybe it wouldn't have been an issue, but I measured the mic and bought the one that should have fit it.
wykończenie
3
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
G
Basic and great!
GearBuff 28.10.2019
Just a simple, good shockmount that works! The plastic feels strong, as do the rubber/elastic bands. Using it for a CM25 MKiii that came with the 3rd Gen Scarlett solo studio pack. Its as if this shockmount was built for this mic. A perfect fit!
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
N
Matches Specs. Good Value. Not ideal for AT2020. May cause damage.
Nonameguy 24.10.2020
The shock mount is exactly as advertised. Bought it to use with an AT2020, it was a tight squeeze but does work, but in fair the dimension given by Thomann are correct so no complaints I knew what I was getting.

As per previous reviews, the edges of the clamp mechanism may scrape the paint work of any mic as you put it in so be careful.

All in all it is good quality for the price and functions well as per description.
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie