Thomann MIDI Socket

268

Mounting Socket

  • For D-standard holes (XLR, Speaker Twist, Power Twist)
  • Standard DIN
  • Solder lugs on the back
  • Black plastic
Numer artykułu 122123
Jednostka sprzedaży 1 szt.
Build In Yes
Plug DIN 5-pol. (MIDI) female
21,40 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Czwartek, 25.04.
1

268 Oceny klientów

4.4 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

87 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
K
Nice MIDI panel socket
Kaiviti 30.12.2019
'Standard' size MIDI socket for fitting to a rack panel or any other panel for that matter. Test plugging this to male DIN plugs feels nice and solid, material itself feels pretty solid so seems like it will be a great alternative to the more common sort of oval DIN sockets. This will also look nicer mounted nesxt to XLR or other panel mounted connectors.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
I
Good MIDI Connector
I'mTheSoundGuy 23.10.2019
It's one of the few D-standard MIDI connectors, and it does it's job. Good soldering pins on the back and ok built quality. Used it in a rack panel to bring the midi connection from the back of an Avid Eleven Rack to the front for much easier connection.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
c
Good MIDI connector
c-chavez 25.06.2023
This connector serves its purpose very well and is very inexpensive. Unfortunately you have to solder the back so that you can actually use it. I've soldered it to another cheap midi cable I had lying around, and use it in my band's rack. It's a great alternative to the more expensive MIDI connector that doesn't require any soldering, and serves the same purpose. If you are ok soldering, give it a try and save some eurs.
You can either solder the 5 wires, or just 3, since MIDI in general doesn't require them all (depending on the interface you will be connecting to).
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
R
Sturdy and clean design
Robert-Jon 25.05.2021
The mounting size for these is 18mm. The socket stays in place with a steel screw-on ring. The two holes provide extra security and keep the socket from rotating. Works as expected.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie