Thon Case for 20-22" TFT Displays

22

Case

  • For 20-22" TFT displays, universal for all common TFT monitors with 20" to 22" screen diagonal
  • The milled sliding slots adapt to variable sizes
  • Max Dimensions (W x H x D): 525 x 440 x 240 mm
  • Supporting boards are padded with foam
  • Made from 7 mm multiplex
  • With 22 x 22 mm aluminium edges
  • min. 1 cm Foam padding
  • 1x Spring loaded butterfly latch, medium
  • 1x Folding handle
  • Small steel ball corners
  • External dimensions (W x H x D): 615 x 527 x 295 mm
  • Weight: 10.9 kg
  • Made in Germany
  • Colour: Phenol brown
Produkt dostępny od Kwiecień 2010
Numer artykułu 246171
Jednostka sprzedaży 1 szt.
Type Display Case
Interior For Displays
Material 7 mm Plywood
Stackable no
Wheels no
Trolley no
IP Certification No
Colour Brown
Weight 10,9 kg
Inner width 525 mm
Inner Depth 440 mm
Inner Height 240 mm
Varinats Thon Display
External Width 615 mm
External Depth 527 mm
External Height 295 mm
Pokaż więcej
919 zł
darmowa wysyłka, zawiera podatek VAT.
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Czwartek, 25.04.
1

22 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

stabilność

montaż

wykończenie

11 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
S
More versatile than you'd think!
Sonovox 30.08.2013
I took a bit of a chance buying this case. I had 2 displays, but only enough money and space in the van for one flight case. Could I fit two? Yes I could!

I run a small SAC rig (google it!), which uses two monitors, and with a 3cm thick sheet of tough foam, I place one monitor in the right way up, tilt the screen back to the back wall, put the foam on the front of the screen, then place the other screen in upside down, so that both screens are facing each other with the foam between to protect them. This also means there is enough room at the back of the screens to place the keyboard and mouse! Very effective. Have run it this way for a couple of years now with no detrimental effects to any of the equipment inside.
stabilność
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie