Warnex Structure Paint Black 1Kg

990

Structure Paint,

  • Fast drying 1K aqueous paint with very good surface hardness
  • Black, semi matte
  • Weight: 1 kg

Simple to use:

  • Economical air drying
  • Environmentally-friendly water thinning
  • Easy application as a 1-component material
Produkt dostępny od Kwiecień 2008
Numer artykułu 208234
Jednostka sprzedaży 1 szt.
Electronic Accessories No
Cabinet Accessories Yes
Stand a. Flying Stud Accessories No
135 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Czwartek, 21.03. and Piątek, 22.03.
1

990 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

439 Opinie

K
Bardzo dobra farba
Kaktuzz 12.12.2017
Farba latwo sie naklada. Po wyschnieciu powierzchnia jest bardzo twarda i odporna
0
0
Zgłoś nadużycie

Zgłoś nadużycie

M
Malowanie kolumn
Marioyon 09.06.2017
Bardzo dobra farba latwa aplikacja, szybko schnie i nie smierdzi Polecam
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
UB
Warnex paint - application is everything
UK Beachboys 24.05.2020
The paint does the job IF you apply it correctly. For touch ups it works well with a stipple application. To get the prickly, textured finish you need to work harder. Clearly spraying, and lots of paint quantity is the best. Roller application works pretty well, but best results are from a pre-coat if the timber is grained like plywood. Direct rolling onto bare ply can be a bit patchy. A overall thing hand brushed coat that just covers first is best. This will seal and fill most of the small voids or grain . Then a rolling with a foam roller, not the softer slightly hairy brushed. The foam rollers are quite stiff, instead of being soft, and if you use the narrower ones you can stick a decent amount of paint down on the first pass, then do a slightly lighter roll that picks up the surface and leaves the texture. You can get a really good finish if you do this - BUT - be aware you will use a LOT of paint. It goes down very quickly. it dries fast normally, but if you use it outside on a sunny day it dries too quickly and it's difficult to not get a patchy result. I have not tried using it in the cold. It is very thick and sticky paint, and while being water soluble for cleaning, it relies on the brushes and rollers being wet - and as soon as they have started to dry, you won't get them clean, so use cheap brushes and rollers and throw them away. Small point but if you have can in the workshop to use as touch ups as I do, be aware the can is quite thin and repeated opening and closing can leave gaps int he seal and this paint goes off very quickly if air gets to it.
13
3
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
great alternative to duratex
Janiz 15.07.2019
Recommended for diy projects or if in need of touching up an old cabinet.
With some patient and several thin layers it is easy to get a professional look.
Don't leave a box open for to long though as the paint will dry up quickly.
It's quite expensive so every drop is precious !
0
0
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat