Adam Hall Stands SLED 1 ultra XLR 4 A

110

Gooseneck Lamp

  • Suitable for Soundcraft, Behringer and Midas M32
  • With 4 white LEDs
  • Power supply via angled 4-pin XLR connector
  • On/Off switch
  • Gooseneck length: 400 mm
Disponível desde Maio 2016
número de artigo 388877
unidade de venda 1 peça(s)
Connector Type XLR 4-pol (male)
Right Angle Plug Yes
LED Yes
Length in cm 40 cm
€ 23,90
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Entrega entre aprox. Terça, 23.04. e Quarta, 24.04.
1

110 Avaliações de clientes

3.9 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

saída de luz

acabamento

54 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
V
Perfect for Yamaha
Vinny 22.08.2018
Used with LS9, not suitable for Behringer or ideas 32 as the XLR is wrong way round & cannot be rotated. But for the rest of the consoles out there this works great. Dimmable & has its now on/off switch on the head.
saída de luz
acabamento
2
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
T
Good all-rounder
Tommy_K 07.09.2023
A good, well made light.

Points to note
- It did not emit any light at less than 60% power on my Behringer X32
- It does not have an upside down plug meaning you may have to bed the light significantly in order to use it with some products (like the X32)

Other than that, no complaints, nice easy button on top, all good :)
saída de luz
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
S
Stratis512 29.03.2019
Not suitable for Midas M32. Had to rotate 180 degrees the xlr to fit properly
saída de luz
acabamento
1
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
S
Gooseneck Lamp
Srakec 18.03.2021
I use the light on the x32 compact. It works without a problem, maybe for this model it could be a few inches longer, but even without it it is great !
saída de luz
acabamento
1
0
Reportar a crítica

Reportar a crítica