Adam Hall Tent Clamp Bk

9

Tent Clamp

  • TÜV-tested
  • Easy installation of event equipment on tent beams
  • Suitable for all standard tent beams with 50 to 100 mm width
  • Uncomplicated adjustment of the mounting width with only one screw
  • M10/M12/M14 Mounting points for eyebolts etc.
  • Material: Steel
  • Surface: Powder coated
  • Dimensions (L x W x H): 170 x 150/57 mm
  • Weight: 1.3 kg
  • Max. load bearing capacity: 150 Kg (30 kg)
  • Colour: Black
Disponível desde Fevereiro 2019
número de artigo 459671
unidade de venda 1 peça(s)
Construction Type Tent Clamp
Max Load-bearing capacity (kg) 150 kg
Colour Black
Min carrier width (mm) 50 mm
Max carrier width (mm) 100 mm
€ 29
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Entrega entre aprox. Segunda, 29.04. e Terça, 30.04.
1

9 Avaliações de clientes

5 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

5 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
h
Great for hanging stuff on the inside of marqees!
heyimdan-dan 26.09.2023
This clamp is great, fixes onto the inside of marquee beams effortlessly. Kind of. It's unfixing it that can be a problem, so when you go up the ladder to remove it from the beam after the event, take a pair of pliers with you.

Also, but mindful of the type of eye bolt/bolt you use with this clamp. Accidentally bought some M14 eye bolts that were too long, so when I attempted to close the clamp onto the beam I damaged the thread on both the eye bolt and the clamp. My advice - fit the clamp to the structure first, THEN fit the eye bolt onto the clamp! Then do the reverse when taking it down! Lesson learned!
acabamento
0
0
Reportar a crítica

Reportar a crítica