Allparts CTS 1 Meg Split Audio Pot

47

Potentiometer for Guitar + Bass

  • CTS potentiometers are the first choice on many American guitars
  • Low tolerance for greater accuracy
  • Resistance: 1000 kOhm
  • Resistance profile: Logarithmic
  • Shaft: Knurled
  • Shaft length: 9.5 mm
  • Thread diameter (hole): 9.5 mm
  • Made in USA
Disponível desde Abril 2016
número de artigo 384567
unidade de venda 1 peça(s)
Design Audio Taper
Resistance Value 1000 kOhms
Characteristic Curve Logarithmic
Thread Length 10,0 mm
Tandem Poti No
Push/Push No
Solderless No
shaft type grooved
€ 8,90
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Terça, 2.04.
1

47 Avaliações de clientes

4.6 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

24 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
EB
Allparts reliability...
Edgar Blackdagger 07.08.2022
What I found with any Allparts pots I've bought is that they go wrong like no others.
Within the first 6 months, if the knob is at 10 and you accidentally turn it slightly more, it momentarily kills the sound, so if you're playing with the volume at 6 and you want to to to 10 for a solo, you first get muted for 1/4 of a second, which is something that of course gets worse during the first year and you have to be unreasonably careful.
During the second year, there come the crackles from dust, no matter the guitar or application you're using it, which is something that happens too soon compared with other pot brands.
These may say CTS but the quality control is AllParts...
I prefer Japanese Goldos, they are practically immortal.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
D
DO NOT BUY THIS POT
Deadhead0987 28.03.2022
I am URGING you not to buy this pot. After soldering together, Lug 1 snapped clean off after minimal soldering time on the lug. This has NEVER happened to me before. Truly unacceptable, I am NEVER buying from these guys again.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
fine quality-good value
Anónimo 08.12.2016
Works as it should be. I use it as tone pot. It seems to be more like a modern log taper (10% log), so it has a bit steep change of resistance. Total resistance value is close enough to stated value (about 1019 ohms). I would prefer it to have lower friction in order to turn easier. I play strats so i want pots to be loose enough so i can change value with my pinky. This pot is in the middle ground.
A fine product.
acabamento
2
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
D
CTS pots are worth the hype.
DonSchlup 08.11.2020
Used to upgrade my Squier J Mascis Jazzmaster, they're well worth it. The stock ones were a bit scratchy, and didn't have a nice taper, but these are just right, making the guitar feel a bit more like a proper Fender. No semblance of complaints here, for sure!
acabamento
0
0
Reportar a crítica

Reportar a crítica