Doepfer A-100PSU3

33

Power Adapter

  • 12 V / 2000 mA
  • -12 V / 1200 mA
  • 5 V / 4000 mA
  • 100-230 V

ATTENTION - the connection and installation of parts which carry mains voltage (mains input, power supply, connecting cable, etc.) must only be carried out by a specialist who is familiar with the applicable safety regulations! Layers may not carry out such installations or wiring themselves! All live parts (cables, conductor tracks, components) must be insulated against damage to the device before start-up, so that accidental contact with these parts is not possible!

Disponível desde Janeiro 2016
número de artigo 377376
unidade de venda 1 peça(s)
Blank Panel No
Bus Cable No
Bag No
€ 155
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Entrega entre aprox. Segunda, 29.04. e Terça, 30.04.
1

33 Avaliações de clientes

4.9 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

características

acabamento

25 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
c
Fantastic PSU
colon 28.07.2020
I have 2 x 9u 84hp cases, each has a psu3 in it. They are very stable and more than anything else protect you from reverse polarity accidents. I have made that mistake several times and each time all the lights on the other other modules flash at about once a second, telling you have got the cable the wrong way round. I have experienced no damage to any module when this has happened. Each case has around 20 modules in it and there is plenty of reserve current for current hungry modules. It also has a built in 5volt supply which is very handy for the occasional module that needs 5volts. I have had the psu for over 3 years now, with daily use. Highly recommended.
características
acabamento
2
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
p
Great!
pedroas 20.04.2020
I've replaced a PSU2 with this unit and its a huge difference in weight and stability. Also quite simple to mount it back on the case and the instructions are available on the page product. Thanks!
características
acabamento
1
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
YF
Don't waste your time with cheaper alternatives
Yann F 17.08.2023
I changed my janky power setup on my modular rig for this a few months back for a Doepfer PSU and rails, and it's probably the best investment I did for it! I had so many weird problems with many modules plus a problematic noise floor that I blamed on the individual modules.... but no! This was it! Just bad power. Swapping for this took care of literally every problem I had with my system.
características
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
MD
Reliable and quiet
Martin Dupras 14.05.2021
I have four of those in a custom-built rack, powering over 32 modules, some of which quite power-hungry. The power supplies have been very reliable. No noise issues, no unexpected behaviour. They look well built and well designed.
características
acabamento
0
0
Reportar a crítica

Reportar a crítica