Höfner 63 H61/73B

60

Machine Head Set for Beatles Bass

  • Original mechanism set for the Beatles Bass Model 63
  • Shaft length to hole: 22.5 mm
  • Shaft width: 6 mm
  • Nickel
Disponível desde Janeiro 2004
número de artigo 166048
unidade de venda 1 peça(s)
Colour Nickel
€ 90
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Sexta, 26.04.
1

60 Avaliações de clientes

4.5 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

29 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
C
NIce replacement for cheaper Hofner basses
ClubMan 31.03.2016
I ordered these tuning machines to replace the stock tuners on a Hofner Ignition Club Bass, since the original felt really cheap and clumsy. These are supposed to be the ones that go on the expensive German Hofner basses, and even they still look like guitar tuners with a plain open mechanism, they are well made and feel smooth and steady.
It's worth noting that they come with bushings and mounting screws, as a set (I was not sure because it is not mentioned in the product description).
Keep in mind though that it is not a direct replacement for an Ignition bass: some minor work has to be done in order to accomodate these tuners. The bushings are slightly larger in diameter, so the holes on the Ignition headstock need to be widened (about 1mm). Then, one of the mounting screws fits one of the existing holes, but for the other screw it's necessary to drill a new guide hole.
acabamento
6
1
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Beatles Bass Upgrade
Anónimo 06.04.2015
I have fitted these to my Ignition Beatles Bass as a direct replacement for the ones it comes installed with.
As other reviewers state you will have to drill one pilot hole per machine head and half of the unused hole from the previous machine heads will be showing.
I have chosen to leave this hole unfilled and unpainted as you cannot see it unless you know its there or you are scrutinising it very closely.
You do not need to install the machine head peg guides (metal sleeves) that come with these but if you want to fit them you will need to drill the peg guide holes out to fit them (more work than is necessary in my view).
They are an excellent replacement being manufactured of higher quality metals that are not loose like the original machine heads.
acabamento
4
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
C
Perfect and authentic quality
Cees 18.05.2019
I used the Höfner 63 H61/73B tuners for a Hofner "1963" bass-guitar restoration project and they where a perfect match in style (looked the same and had the same measurements). Also the quality is sublime, they used some good materials for the knobs and gears and it runs smoothley. And the most important thing:"they stay perfectly in tune"
acabamento
1
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
V
Original is original
Vlajsa 17.11.2020
This tuning pegs are of course original and very good manufactured, I have bought for my Hofner 66 501/1, they are amazing.
acabamento
0
0
Reportar a crítica

Reportar a crítica