Mojotone CTS 500K Std. Split P/P VT Pot

Iniciar 360°

Mostrar tradução

Potentiometer for Guitar and Bass

Integrated push/pull switch
Resistance curve: Logarithmic
Manufactured in accordance with the high quality requirements as set out by CTS
The "Vintage Taper" resistance curve of these potentiometers is between that of a standard logarithmic and that of a linear pot, enabling a more natural control response
Resistance: 500 kOhm
Finely grooved split shaft (24 splines for US guitars and pot buttons)
Shaft diameter: 6 mm
Thread length: 9.5 mm
Thread diameter: 9.5 mm
Housing diameter: 23.8 mm
Includes a washer, a tooth lock washer, and a nut

Disponível desde Novembro 2020

número de artigo 494193

unidade de venda 1 peça(s)

Design Split Shaft

Resistance Value 500 kOhms

Characteristic Curve Vintage Taper

Thread Length 9,5 mm

Tandem Poti No

Push/Push Push/Pull

Solderless No

shaft type grooved

€ 13,90

IVA incluído, € 20 de portes de envio adicionais

Envio previsto até Quinta, 25.04.

Posição de vendas

em Potenciómetro

Eis o que compraram os clientes que visualizaram este artigo

31%

comprado

Este artigo exatamente

€ 13,90

10%

comprado

Allparts CTS 500K Audio Taper Pot

€ 9,90

comprado

Mojotone CTS 500K Std. Split VT Pot

€ 11

comprado

Allparts Audio Taper 500k Push/Pull Pot

€ 11

comprado

TAD CTS 500K Std. Spl. P/P VAT Pot

€ 11,90

37 Avaliações de clientes

5 31 Clientes 4 5 Clientes 3 1 Cliente 2 0 Clientes 1 0 Clientes

4.8 / 5

acabamento

Diretrizes de apreciações

29 Críticas

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Excellent as a tone pot, tight fit!

Newbie Guitar Player 09.06.2022

I bought this as part of a pickup swap / rewiring job on my Squier Mustang HH. I installed it as a tone pot and wired the push-pull switch for splitting the bridge humbucker (neck position is a P90). The PCB makes it really easy to wire the P/P. There was also some space between the PCB and the pot itself to tuck in my capacitor and retain the original profile. Do beware that it is a full-sized pot and quite bulky, more so because of the P/P. Be careful and measure your guitar cavity before buying. The Mustang control cavity was a realy tight fit and I had to modify the part a bit by bending the two prongs at the top. I also routed the cables around the pot as there was no space behind/underneath it. The control plate on the Mustang is relatively thin sheet metal and the pot sticks up a bit above the surface, but that doesn't really bother me. Luckily I had no issues with the thread diameter and it dropped right into the control plate opening - no wobble, no need to enlarge the opening. For the knob I used a metal screwable one that has a smooth inside surface and is made for 6mm shaft. If you want to get a knurled knob or re-use your old knob, check your measurements and make sure it has the correct number of splines for the US standard.

Overall I am really satisfied with my purchase, even though I had some minor issues with the fitment. The pot functions well and I am happy with the tone responce I get from the vintage taper in conjunction with a 47nF capacitor. It rotates smoothly and doesn't scratch. Push-pull works as expected. As with any guitar mod, my advice is to measure carefully and be prepared to adjust some things if necessary.

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Nice pot

StephanPK 27.01.2022

Big, easy to solder, but could not fit if you have small guitar cavity, so check it before you buy it

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

High quality

Burak Oncel 16.09.2022

This cts pots are in good quality, I like them. But they are very big. You need to know is your guitar cavity big enough for cts pots if you want to buy this product.

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Mojotone CTS 500K Std. Split P/P VT Pot

LameGuitarist 17.11.2022

super good pot ... preoper resistance when turning and push-pull ... no wobble ... in fact only good things can be said :)

Reportar a crítica

Ler todas as reviews

Mojotone CTS 500K Std. Split P/P VT Pot

Potentiometer for Guitar and Bass

Eis o que compraram os clientes que visualizaram este artigo

37 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

29 Críticas

Navegador inteligente

Artigos recentemente vistos

Compre e pague em segurança

Os seus benefícios

Serviço

Servido com amor!

Mojotone CTS 500K Std. Split P/P VT Pot

Potentiometer for Guitar and Bass

Eis o que compraram os clientes que visualizaram este artigo

Acessórios e artigos correspondentes

37 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

29 Críticas

Comparar opções

Navegador inteligente