Palmer PDI-06-8 Ohm

54

Load Box

  • Adjustable in 6 steps (100%, 70%, 50%, 35%, 25%, 18%)
  • Reduces the volume of a guitar speaker at full saturation of the tubes
  • Made for 8 Ohm or 2x 16 Ohm loudspeakers
  • Bypass/ attenuator switch for fast switching between full and reduced output power
  • Input: 1x 6.3 mm jack socket
  • Output for loudspeaker 2x 6.3 mm jack socket in parallel
  • Output impedance: 8 Ohm
Disponível desde Agosto 2011
número de artigo 268044
unidade de venda 1 peça(s)
B-Stock from € 249 disponível
€ 269
Envio gratuito, IVA incluído
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Quinta, 25.04.
1

54 Avaliações de clientes

4.4 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

características

som

acabamento

32 Críticas

JC
Good and simple.
Joao Clara 08.03.2022
Good attenuator, simple to use.
Theres prety much no diference in tone when its on, unless youre using the 18% power option.
Prety good overall.
características
som
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
C
Really good quality
Csubee 28.09.2020
I use it at home with my Peavey 6505 120W + Engl 4x12 Pro.
I needed this, becasue sometime i have to lower the volume on my rig.

My expactations were not really high, becasue You can read everywhere how attenuators affect the sound of your amp, and how bad they are. I can say i was really suprised.

Compared to the natural sound of my amp i can barely tell the difference (Except the volume ofcourse).
I usually use it on 50% or 75% to attenuate the volume for normal room use, but using on 18% give me a surrealistic feel, becasue i never had a chance to play my amp monster late night. Now its not a problem anymore. At 18% the sound gets a little bit muddy (But still enjoyable) but im sure about its becasue the signal at this level is too low for my 4x12.
The construction is perfect for me. Simple, strong and straightforward. I expected it to heat up after a while, but i never noticed it.
The bypass function also working fine and it makes easy to switch between the amp original and the attenuated volume.

So, I can only recommend it if you need to lower the volume on your rig.
características
som
acabamento
1
1
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Best attenuator on the market!
Anónimo 07.06.2015
Small, simple to use and decent volume differences.

It's fantastic for live shows, I usually set it on 50% with my Mesa Boogie dual Rectifier. It keeps the levels between the different amp channels EXACTLY the same. I've found that some others change the levels for solo boost and clean a fair bit.

Great tone at low volumes!!

It's made by Palmer, so it's a bit pricey, but you get what you pay for!!
características
som
acabamento
2
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
J
Solid design
Joffen 28.08.2020
It does what it's supposed to do, and appears to be built like a tank.
características
som
acabamento
0
0
Reportar a crítica

Reportar a crítica