Stairville DS-2 RF DMX

276

DMX 1-Channel Dimmer

  • With external fader for manually setting the output power (also usable as pre-heat function)
  • Max. Power: 10 A / 6 A for inductive loads
  • The DS-2 can be set as a dimmer or switch pack via the menu
  • DMX address and set the functions via display
  • DMX input and output: 3-Pin XLR
  • Power supply: AC 230 V ~ 50 Hz
  • 10 A max. (inductive load max 6 A)
  • Dimensions: 182 x 92 x 65 mm
  • Weight: 1.1 kg
Disponível desde Dezembro 2009
número de artigo 228802
unidade de venda 1 peça(s)
Control Of Par´s (Dimmer) 1
Sockets Safety Plug Socket
Mode of Action Leading Edge
€ 69
IVA incluído, € 20 de portes de envio adicionais
Desconto de quantidade
Preço unitário Poupará Montante
€ 69 1
€ 63 8,7% 3
€ 59 14,5% 5
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Quinta, 25.04.
1

276 Avaliações de clientes

4.6 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

manuseio

características

acabamento

119 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
B
More than enough for the price. Easy to modify.
Bipolar 16.09.2019
I have them attached to the side of PAR can mounts for the PAR cans that I move around a lot - easy way to put them anywhere where there's DMX and power available. I have used them for 50W to 1000W lamps and they have worked flawlessly so far. They have also survived a few blown lamps. I have even used them to switch some random decorative LED lights or UV fluorescent lights on or off (without dimming).
The unit has a proper metal case and is built solid enough to survive more than a few bumps and drops. Overall build quality seems to be surprisingly good both outside and inside. All the terminals inside are properly secured, it has proper grounding, no loose screws, soldering is good. The switching element is a BTA416008 triac, which is rated for 40A and can handle 400A surge current for 20ms.
Only problems I saw where not enough thermal compound between the internal heat sink and the case (not really a problem in my case - the internal heat sink doesn't get that hot) and the inductor is only partially potted so you can hear some buzzing when the dimmer isn't fully on or off (I have one at home and it's a bit annoying but not really a problem on a big stage). Also the mains cable isn't very flexible
.
I replaced the 3 pin XLR sockets with 5 pin ones on my units. It was quite easy to do as there where extra solder pads for 5 pin sockets (but you have to remove 15 screws to get the PCB out).

The user interface (3 buttons and numeric LED display) is simple but intuitive enough to make the user manual useless.

If you need a cheap and reliable dimmer for incandescent lamps, without anything too fancy, this one will do fine if you don't mind a slight buzzing sound.
características
manuseio
acabamento
1
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
M
Perfect for little rentals
Märt 27.05.2019
I bought two of these units to leave with clients on a little stage. They can use the little remotes included, to control the light on stage.
Pros:
Simple to use
Compact
Professional looking
Cons:
Only one channel
The dmx out connection broke on one unit
características
manuseio
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
Y
Good but a bit loud
YourDAD 25.02.2020
Pros:
Good product for a great price.
Well built.

Cons:
A bit loud when dimming. It is totally ok for 95% of the cases, but for cases when silence is needed, this might not be the way to go.
características
manuseio
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
G
Works as is supposed to
Gimzo 21.08.2018
I use it as an auxiliary dimmer when needed. I mostly run 1000W PARs on it, but also practicals when needed.
It is small, easy to carry, easy to mount to most places, and easy to use standalone or on DMX system. Build quality seems good.
I wouldn't mind having different dimming curves, instead of linear/step, but for the price it does the job well.
características
manuseio
acabamento
0
0
Reportar a crítica

Reportar a crítica