the sssnake Cat Snake 3FC

132

Passive Cable Splitter

  • RJ45 socket to 4x XLR 3-pin female
  • Analogue cable whip that uses the 4 wire pairs and the shielding of a network cable rather than a 4-channel multicore to send 4 analogue signals from A to B.
  • Compatible with any shielded network cable with an RJ45 or Ethercon connector of any length
  • Can also be used for DMX
  • Dimensions: 48 x 110 x 40 mm
  • Weight: 400 g
  • Compatible with all products of the sssnake Cat Snake series
Disponível desde Setembro 2019
número de artigo 465519
unidade de venda 1 peça(s)
Design Box
Distribution Type 1in4
RJ45 connection female
Number of RJ45 connections 1
Signal Connection 3-pin XLR female
Number of Signal Connectors 4
Connector in RJ45 female
Connection out XLR 3-pin female
€ 29
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Entrega entre aprox. Segunda, 29.04. e Terça, 30.04.
1

132 Avaliações de clientes

4.8 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

58 Críticas

MJ
CAT Snake 3FC
Melo Jorge 09.11.2023
Uma solução económica e eficiente para transportar 4 universos DMX em longas distâncias. Robusto e com bons acabamentos. Bom produto. Atenção que é necessário adquirir 2 caixas. Uma com machos XLR, e a caixa com Fêmeas XLR e interligá-las com cabo de rede RJ-45 CAT 5/6.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
BM
Great way to run cable looms over Cat 5
Broadwood Music Productions 18.08.2020
I was looking for a simple way to run auxiliary XLR cables between control room and live room so instead of getting a stage box for a fixed solution I decided to explore the option of using Cat 5 cable to run multiple signals. I purchased both the female and male XLR versions of the Ssnake Cable splitter as it was by far cheaper than other well known brands and I'm please to report the build quality and usability is great. I just run the Cat 5 as a permanent install terminated with RJ45 connectors and just connect these in the appropriate rooms and you have 4 XLR's available to you. What's more you are not limited to which gender you have per room, simply unplug and swap ends.
acabamento
1
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
d
dee:kei 28.06.2021
ethercon lock is oriented to side where the casing is, so unpluging of cable is an issue. I would suggest to get rid of casing offset around ethercon, also xlr connectors are cheap and may be a source of problems when using very often. if it is for instalation there should be no problem.

using as an 4 way multicore looking to be good, and as we all have bunch of ehternet cables laying around it is a great possibility to use them.
acabamento
1
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
h
Great for multiple things!
heyimdan-dan 26.09.2023
I used this piece of kit for getting L/R and sub audio up to a truss frame that had been built over a ring for a boxing event. Since it's impractical to run cables around the ring, the best thing to do seemed to run a single Cat5e cable up into the roof space and down into the truss frame.

On the fourth spare channel I sent up some DMX data. I wasn't sure if the DMX and audio would transfer together uninterrupted, but it worked perfectly. In fact, it performed better than any of the fighters that night!
acabamento
1
0
Reportar a crítica

Reportar a crítica