the sssnake Cat Snake 3MC

153

Passive Cable Splitter

  • RJ45 socket to 4x XLR 3-pin male
  • Analogue cable whip that uses the 4 wire pairs and the shielding of a network cable rather than a 4-channel multicore to send 4 analogue signals from A to B.
  • Compatible with any shielded network cable with an RJ45 or Ethercon connector of any length
  • Can also be used for DMX
  • Dimensions: 48 x 110 x 40 mm
  • Weight: 400 g
  • Compatible with all products of the sssnake Cat Snake series
Disponível desde Setembro 2019
número de artigo 465522
unidade de venda 1 peça(s)
Design Box
Distribution Type 1in4
RJ45 connection female
Number of RJ45 connections 1
Signal Connection 3-pin XLR male
Number of Signal Connectors 4
Connector in RJ45 female
Connection out XLR 3-pin male
€ 29
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Entrega entre aprox. Terça, 23.04. e Quarta, 24.04.
1

153 Avaliações de clientes

4.9 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

74 Críticas

MJ
CAT Snake 3 MC
Melo Jorge 09.11.2023
Uma solução económica e eficiente para transportar 4 universos DMX em longas distâncias. Robusto e com bons acabamentos. Bom produto.
acabamento
0
0
Reportar a crítica

Reportar a crítica

J
Muito eficaz
Jpsom 20.09.2023
Ótimo para resolver qualquer ligação extra
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
t
Good but needs numbering to correspond to 3FB.
thelxman 21.11.2020
A good little box for collecting (say) your mic tails together. Used to collect up some stage mics tails to route to where the S16 digital snake box is positioned.

Metal chassis, but not Neutrik connectors at this price point.

I had to label it up to match the numbering on the partnered 3FB breakout box. The tails are coloured on this product but numbered on the 3FB, so to know which-is-which you'll have to add your own number labelling to the tails. Maybe Thomann could take this requirement as a product revision.
acabamento
5
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
h
These things are life changing.
heyimdan-dan 10.11.2023
At first it just seems like a great idea, but the more I used these the more it just made sense. Less clutter on stage, less mess, everything is far more organised, I even run these out of a 4-way rack DI on stage so a single cat5 is all it takes to get the signal where it needs to be. Same with the outputs from the crossover to the amps, it just makes sense! I’ve even been able to use these in situations where I needed to be creative transferring DMX with AES/EBU and two channels of analog audio.

There are lots of options available here and I’m grateful that this stuff just works without any loss in signal quality. It’s worth watching Dave Rat’s stuff online to see how much efficiently cat5 transfers audio over long distances compared to standard mic cable. I’m astonished cat5 with audio didn’t happen sooner, it just makes sense!
acabamento
2
0
Reportar a crítica

Reportar a crítica