Thomann Case Soundcraft EFX8 EPM8

291

Mixer Case

  • Suitable for Soundcraft EFX 8 and EPM 8
  • 1 Case handle
  • Inner dimensions (W x D x H): 370 x 370 x 100 mm
  • Height of lower part: 90 mm
  • Height top part: 10 mm
  • Outer dimensions (W x D x H): 400 x 440 x 145 mm
  • Weight: 2.8 kg
  • Colour: Black
Disponível desde Outubro 2011
número de artigo 267783
unidade de venda 1 peça(s)
made for Soundcraft
Type Case
Material PVC/Aluminium
Wheels No
Dockhouse No
Inner width 370 mm
Inner depth 370 mm
Inner height 100 mm
Colour Black/Alu
Weight 2,8 kg
External Width 400 mm
External Depth 440 mm
External Height 145 mm
Mostrar mais
€ 55
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Quinta, 28.03.
1

291 Avaliações de clientes

4.6 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

estabilidade

manuseio

acabamento

135 Críticas

A
Sem esponjas para a Soundcraft EFX8
Azeitão 31.01.2018
A mala não tem o material necessário para colocar uma Soundcraft EFX8. Fica 1 dedo de intervalo entre a mesa e o topo da mala (+/-2cm). Não fica presa como devia. Precisam de enviar mais esponjas para limitar o lado superior e/ou inferior da mala. De lado está com as medidas certas
estabilidade
manuseio
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
JB
SAVED MY DESK
Jack B. 31.07.2017
So I've had my case for nearly two years, it not only contains my desk but an interface (Roland Duo) Headphone amp, cables and power all tucked just underneath the desk.
The catches did start to show a bit or wear and tear but for the amount of use it gets that is to be expected.
However the important bit is how well does it do the job of a hard case? the answer is very!
Last weekend while working a family festival rather foolishly left my desk in front of the wheels of my car. and after loading everything else decided to drive away.... straight over my case with my desk and all the extras nestled inside. a little confused to the bump i carried on before running over it with the back wheels for good measure. unsuprisigly the case is totalled splintered cracked buckled and warped but to my surprise, inside its caracas everything has survived without even a scratch all dials attached and straight.

So here i am buying the same case again to replace the flat one, so it can continue to protect my desk after its comrade gave its life to do so.
3
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
R
Does exactly what you expect
R.V. 29.05.2017
Great choice for safer and more comfortable transportation with a cheap price.
I bought Thomann Mix Case 4044I as a hard case for Soundcraft EFX 8 Analog mixing desk, we used to actively use it for about 6 month after which we switched to a different mixing desk. So far it has proven to be trustworthy, durable, able to withstand sizable amounts of weight (As we don't have a big car, we had to put all hard cases including this one in the bottom of the car. All the musical instruments, drums were put on hard cases to save space for other gear. It became a routine every time we had to play a concert using our own gear to put this case in the bottom or middle).
Pros:
1) Durable and trustworthy
2) Reasonable price, even cheaper than some cases made from cloth
3) Has enough space for mixer + a few wires which helped us save a little space in our small car as well
Cons:
1) Henges are made from plastic, but still have a strong feel
2) Inside the case is completely flat, "rubberlike", safer amortisation could be achieved with cube foam.
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
KS
Mix case
Kostas Saxophone 17.08.2018
Got me this case for my Soundcraft EFX8 mixer.
Has enough space to store power outlets maybe one or two cables under the mixer.
The fitting is ok too. No major displacements of the mixer while on the road.
Cushioning is fair, and the foam on top is working nicely by holding the mixer in its place when in upright position.
Loved the latches in the back, well thought through.
The latches in the front are also good but not very promising.
The handle is nice and comfy for carrying the case.
It maybe could have a shoulder strap as well, would be a nice addition!
When the case arrived one corner cushion was not glued to its position and was just moving around in the case.
Not a good sight for a new case. Quality test didn't see that on its way out.
Overall a good value for money and a fair case that doesn't ruin a tight budget.
estabilidade
manuseio
acabamento
0
0
Reportar a crítica

Reportar a crítica