Behringer ADA8200 Ultragain

703

AD/DA Converter

  • Successor to the Behringer ADA8000 Ultragain
  • 8-Channel AD/DA transformer 24-Bit at 44.1/48 kHz
  • 8 Integrated microphone amplifiers (designed by MIDAS)
  • Sample rate sync
  • All Mic/Line inputs routable to ADAT outputs, all ADAT inputs routable to Line outputs
  • 48V Phantom power at each input
  • Integrated "Planet Earth" mains adaptor
  • Rack format: 19" / 1 RU

Connectors:

  • 8 x XLR Mic in
  • 8 x 6.3 mm jack line in, balanced
  • 8 x XLR line out, balanced
  • ADAT in/out
  • Word clock
disponibil din Septembrie 2013
numărul articolului 317776
unitate de vânzare 1 bucată(ăţi)
Channels 8
Number of microphone inputs 8
Instrument input No
Tubes No
Compressor/Limiter No
Equalizer No
De-Esser No
Phantom power Yes
Phase Reverse No
External effect loops No
Analogue Outputs XLR
Digitale Outputs ADAT
Headphone connection No
Level Meter Yes
Amount Of Channels 8
AD Conversion 1
DA Conversion 1
Max. Resolution 24 bit
Max. sampling rate 48 kHz
ADAT 1
Word clock 1
Number of analog inputs 8
Number of Analog Outputs 8
Special Features 8 Mic-Preamps, 48V Phantom power
Design 19" / 1U
Mai mult
1.090 lei
toate prețurile includ TVA
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare gratuită așteptată între Luni, 29.04. și Marţi, 30.04.
1

703 Evaluările clienților

4.6 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Manipulare

Caracteristici

Sunet

Măiestrie

427 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
DB
Don't listen to the bad reviews!
Dan B, UK 07.05.2020
I wish people would understand that this is not designed for single channel preamp stuff like lead vocals!!! Yes, it's flat sounding, but that's what I like about it. I don't care for hyped bass or mid range etc., everybody EQ's later anyway so I don't understand the fuss about having a coloured sound right out of the box. I use my Audient for single channel stuff and the Focusrite Saffire Pro 40 + Behringer for drums and multi tracking. For loud sound sources like drums and cranked amps, I can't hear the difference between these midas preamps and the Saffire ones. Maybe on a quiet intimate vocal or subtle strings etc. you can hear differences but it's all about choosing the right tool for the right job. Why blow thousands on something which only gets used on extra toms etc. when you can't hear the difference anyway? It's disingenuous to do an A/B test on something it was not designed to do. The fact that it's ADAT and needs a host interface to piggy back off means that people only buy this because they need more channels for drums and multi-tracking. Nobody is buying this as a single channel preamp for vocals, so comparing singing tracks or solo instruments is pointless. This is an inexpensive expansion purely for when you need more tracks, like tracking a live band or recording drums.

Pros: Easy setup, flat uncoloured sound, quiet preamps, separate line-in inputs on every channel

Cons: There are none at this price point. Anyone who has issues with this has misunderstood its purpose.
Manipulare
Caracteristici
Măiestrie
Sunet
66
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Thoughts on the Behringer ADA8200 Ultragain
Anonim 25.07.2014
I ordered the ADA8200 to expand the I/O on my Motu 828 MkII as I have 5 synths that I like to use and don't want the hassle of plugging and unplugging them. Also it is a good way of future proofing my project studio as my needs change.

The unit itself is one rack unit high and seems sturdily made and looks good in the rack. Hooking it up to the Motu was easy, but the documentation supplied is a bit thin in content. I ended up following the setup done by the reviewer in Sound on Sound magazine, which is where I had read about the unit in the first place.

I am only using the line inputs so I can't comment on the Midas mic pre-amps but it's nice to have these for when/if I record some vox in the future. I would have preferred for there to be fewer mic inputs in order to make space round the back of the unit for the inputs. These are all located in the front with only the outputs located on the rear panel. This means I need to use a patch bay and cables in order to keep the clutter of leads at the back. I'm sure It couldn't push the cost up too far to move to a 2U unit and tuck everything away at the back, perhaps with a couple of inputs at the front as other manufacturers seems to do.

Since I've had the unit I have to confess that I have barely noticed it. I set the input levels of the analogue inputs and accessed the sound through the Motu software or as inputs 9-16 in my DAW. This is the highest recommendation I can give really - the ADA8200 just works without any fuss.
Manipulare
Caracteristici
Măiestrie
Sunet
14
2
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Perfect
AstronautDown 08.10.2021
A great ADAT to expand your inputs/outputs. The only thing I would like on this would be a little lock in the pots in the middle position to help when using channels as stereo pairs.
Manipulare
Caracteristici
Măiestrie
Sunet
3
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
n
Fairly bad crosstalk
ninbura 22.12.2023
This unit is great for running 1-8 mics in the same environment, as you'll get crosstalk naturally from your microphones picking up the surrounding environment.

However, if you had planned to mix and match dissimilar sources that cross talk becomes a pretty big nuisance. I was attempting to run mics on inputs 1&2 and an hdmi audio extractor on inputs 3&4. The signal from the mics was clearly audible on inputs 3&4, and vice versa.

Like I said, great for mic-ing a single environment / source. For example, drums. You'll get natural crosstalk much louder than the internal crosstalk. But for trying to isolate totally dissimilar sources you're going to run into trouble.
Manipulare
Caracteristici
Măiestrie
Sunet
2
0
semnaleaza un abuz

semnaleaza un abuz

YouTube pe acerst subiect