Behringer Monitor1

117

Passive Monitor Controller

  • 2x Jack / XLR combination input
  • 1x 3.5 mm stereo mini-left input
  • 2x XLR male output
  • 1x 3.5 mm stereo mini-left output
  • Switchable mute
  • Switchable mono-summing
  • Metal housing
disponibil din August 2017
numărul articolului 415617
unitate de vânzare 1 bucată(ăţi)
Number Of Monitoring Outputs (Stereo) 1
Headphone connection 0
Talkback Function No
Built-in AD / DA converter No
Incl. Remot control No
Level Meter No
Number of 2 track inputs 0
Summing Function No
Surround No
Design Desktop
243 lei
Include TVA la care se adaugă 89 lei costul de transport
Disponibil in 4-5 Saptamani
Disponibil in 4-5 Saptamani

Asteptam acest produs in stoc curand si va putea fi expediat imediat.

Informații despre livrare
1

117 Evaluările clienților

4.8 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Manipulare

Caracteristici

Sunet

Măiestrie

71 Recenzii

N
Really good
Naja 18.11.2018
I bought this so I could control the output volume coming from a DAC and for me it does that with flying colors.

To my ears this adds no coloration to the sound, it's just a simple passive circuit doing the job flawlessly.

It has a metal construction, connectors feel sturdy, the switches have a great tactile feel to them and the knob is smooth from start to finish.

The only con I can find is that you can't control multiple pairs of monitors with it, though for me that isn't a problem since I bought it to do a specific job.

I wasn't expecting so much value for so little money, the price makes this a steal.
Manipulare
Caracteristici
Sunet
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
KD
Looks and feels solid, but the sound disappoints
Kasper Drazewski 04.06.2021
I wanted to use the Monitor1 volume control as a safety between my Audient ID44 interface and IK MTM monitors, using Mogami 2534 cables. Its simplicity was quite promising and I tried it for almost a month until I finally gave up.

The good: It's a well built, pleasant looking device with a good feel to the enclosure, buttons and the volume knob. It does not come with any bells and whistles and makes a good down-to-earth impression.

The bad: Passive attenuators should be used at or near full volume, otherwise they will impact the sound signature. However, this one is quite disappointing in the entire volume range.
First, you lose quite a lot of sound resolution with this device. It has poor channel separation and the soundstage becomes small and flat, particularly at low volumes.
Second, as is common for passive attenuators, the tonal balance changes with the position of the volume knob. However, here I found no position that would sound good: as you turn the volume up, you get from quite dark to bright-ish but with an unpleasant sharpness in the highs. It can sound fine with some recordings, but the minute you bypass it in your audio chain, you will see how much it has taken away.

Ultimately it was replaced with an SPL Volume2 and although by no means transparent, it preserves most of the imaging and its colouring, although noticeable, is much less invasive.
Manipulare
Caracteristici
Sunet
Măiestrie
6
3
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
AR
Great quality inexpensive monitor controller
A R C 04.08.2020
The monitor controller takes 2x XLR or Balanced Jacks in and 2x out. Ive had it for about 2 years now and it holds up great. The mute function is particularly helpful when I want to turn synths or phantom on and off to prevent pops and loud sounds. I use the volume control extensively and it's very smooth and easy to reset to any position due to the markers. It's entirely passive so no need to power it. It also has stereo 3.5mm I/O which I haven't used that is designed for monitors - Behringer support advised me that the signal is too hot for headphones although I suppose if you have high impedance cans it might be OK.
It's built of solid metal (including the dial and I think the buttons) and is extremely sturdy. To this day I have had no problems with the build quality and it looks as good as the day I got it with no scratches or paint rubbing off.
The mono function is a great addition for checking mixes esp. regarding phase. I'm now looking to get some more monitors so will probably have to upgrade to a controller with more outputs, but at the time I didn't need one. Even so I don't regret the purchase as it's a great price and compact enough to fit in my setup when it was much smaller.
Manipulare
Caracteristici
Sunet
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
C
Pretty good - but not perfect
CalebZ 03.05.2020
the controller seems to be well built. Solid case, nice feeling knob. jacks and buttons feel solid as well. Most importantly, no apparent tone bleed. The one complaint I have with the one I received is that even at zero, the left channel still passes a small amount of audio signal. Some more detailed testing show that as volume levels increase, the imbalance in L/R signal remains - Though sound quality appears to be unaffected. Minor adjustments to the individual monitor levels and careful sound measurements at the listening position have proved to be an effective workaround.
Manipulare
Caracteristici
Sunet
Măiestrie
2
0
semnaleaza un abuz

semnaleaza un abuz