Daddario EXL158

363

String Set for Baritone Electric Guitars

  • Nickel wound
  • Wound G string
  • Gauges: 013, 017, 026, 036, 046, 062
disponibil din Mai 2004
numărul articolului 170483
unitate de vânzare 1 bucată(ăţi)
String gauge 013 - 062
Strength of the strings 0,013" – 0,062"
Material Nickel Plated Steel
52 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Joi, 25.04. și Vineri, 26.04.
1

363 Evaluările clienților

4.8 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Sunet

Măiestrie

145 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
AG
Perfect for B tuning
Andrei G 24.10.2018
I am going to address string tension in relation to the tuning and the scale length of your guitar in my short review, I consider this a really important aspect that's often overlooked.

I use this set for B tuning on an Ibanez RG560, with a scale length of 25.5 inch / 647,7mm (Fender scale). The tension is perfect and the wound 3rd string will make your life easier when setting the intonation.

Alternatively, if you consider using them on a 24.75 inch / 628.65mm (Gibson / Epiphone) scale guitar, they're great for C standard.
Sunet
Măiestrie
8
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
SB
Like a piano.
Scotty B 14.05.2021
If you aren't going to go with flats on your baritone, than these are the next best thing. These are meant for 27" to 28" scale baritones and I have them on a 27" Fender Jaguar tuned to B Standard, but could easily go down to G Standard. Low B sounds like a piano and the tension is perfect.
Sunet
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Great quality as ever from D'Addario
Anonim 25.02.2014
I use these on a 28 and 5/8" Warmoth necked baritone guitar and they perform just as well as D'Addario's other nickel strings. Personally, I found the 2nd thinnest string -tuned to F# (when the guitar is in standard B tuning) felt a little too light when compared to the 1st string (tuned B) and the 3rd wound string (tuned D). So I now use a plain 18 instead of the supplied 17 -but this could just be a matter of preference. Buying each string separately and making a custom baritone set would never be as cheap as buying a set like this and even after changing out the 17 for an 18 saves me money. I use 10 gauge D'Addarios on my normal guitars anyway, so can always use the extra 17 gauge strings as G strings in standard tuning. The thickest string (a 62) might be too thick to go through some tuner posts, but you can always drill/file out the hole slightly to accommodate thicker strings like these if necessary (I did this with a Schaller locking tuner and it works perfectly).
Sunet
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
K
Unleash the thunder
Kaiviti 20.03.2019
I'm a long time D'Addario string user on regular scale guitars and long scale bass and these are equally superb - balanced, bright but not thin sound, just sound awesome clean or overdriven. I get decent string life and very rarely break strings even though I pick hard with a very heavy pick. Tuning stability is good too and general feel is good, string handling noise is low. Reslly, you can't go wrong with D'Addario sytings in my humble opinion - also, the pack is environment friendly too.
Sunet
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz