EMG Zakk Wylde Set Black LS

525

Set of Pickups for Electric Guitar

  • 2 Active humbuckers
  • Long shaft
  • Colour: Black
  • Incl. EMG's exclusive "solderless" solderless installation system: 2 x 25k long shaft volume pots, 2 x 25k long shaft tone pots, battery bus, stereo output jack, 2 x pickup in/out buses, 2 pairs of mounting screws and springs, 2 x pickup cables, 4 x connection cables, output cable and battery cable
disponibil din Mai 2002
numărul articolului 154102
unitate de vânzare 1 bucată(ăţi)
Active Yes
Wiring Solderless
Output High
Kappe Yes
Colour Black
Position Bridge, Neck
833 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Miercuri, 24.04. și Joi, 25.04.
1

525 Evaluările clienților

4.8 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Sunet

Măiestrie

282 Recenzii

J
Cea mai buna alegere
Jambi 13.06.2023
Am facut cea mai buna alegere cu aceste doze. Montarea lor a fost foarte usoara datorita faptului ca nu a fost nevoie sa fac lipituri. Sunt super multumit si incantat.
Sunet
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
B
Love the bridge pickup, very good neck one. Might need some woodwork but great set
BrownJenkin 18.02.2018
I'm not very good in soldering stuff so, when I was going to try an upgrade for the SG type I own I decided to stick on this set.

PROs
1) The sound is really different from the standard humb I previously have. I can say it's more balanced when using both positions. The great different I feel is more on the bridge pickup, a crunchy, powerful long sustained sound, great for riffs with a distortion effect. 2) The neck one has a more similar sound than a standard humb, yet it's very powerful.
3) The solderless cables are superb if you're not used to do this kind of work. They are quite resistant so you can stress them a little bit excluding the risk of breaking them.

CONs
De facto you'll have to study where and how to put the stuff in place. I didn't have a guitar with battery holder. So you need to reserve a space for the 9V battery. You need to place the battery not too far from the jack input, so I suggest to do a little plan measuring each part and where to place it. I had to dig a little hole with a tools file and changing the position of one of the screws of the cover. On the EMG website there's a tutorial video on a Gibs Les Paul and you can find all the specifications you need to evaluate the kit.
The only negative thing I found was this: the battery to jack cable a little too short so I had to do a little woodworking.

By the way, the pickups are a huge step up from the standard ones. I can't compare them to old Gibs humbs or competitors, but for my case they were great.
Sunet
Măiestrie
3
4
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
a
EMG Zakk Wylde set
alehopp 15.09.2020
Installed them into my Epiohone Les Paul Custom pro.
They do what you would expect from a EMG set.

I was amazed about how easy it is to install these!

If you are looking for a good metal tone and a system which is easy to install, I fully reccomend checking these out, they are worth the money.
Sunet
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
S
Great metal chuggers
SanHolo 04.10.2021
The pickups have that classic metal/ hard rock tonality we are used to hearing from Zakk, but also bands like Metallica. Impressive is also the packaging/ presentation, almost apple like. Installation is also very easy with the solderless kit, however i have a panel mount type output jack and a weird 3 way selector switch which meants some soldering was still needed. However installation was still a breeze.
Sunet
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

YouTube pe acerst subiect