Allparts CTS 500K Audio Taper Pot

238

Potentiometer

  • 500 KΩ
  • Logarithmic
  • Knurled shafts
  • CTS Potentiometers are the first choice on many American guitar models
  • Low tolerance for less dispersion and more precision
  • Total height: 30 mm
  • Total diameter: 23.5 mm
  • Threaded shaft length: 9.5 mm
  • Thread diameter: 9.5 mm
  • Shaft diameter: 6 mm
  • Allparts-Nr. EP-0086-000
disponibil din Aprilie 2017
numărul articolului 411573
unitate de vânzare 1 bucată(ăţi)
Design Split Shaft
Resistance Value 500 kOhms
Characteristic Curve Logarithmic
Thread Length 9,0 mm
Tandem Poti No
Push/Push No
Solderless No
shaft type grooved
48 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Vineri, 5.04. și Luni, 8.04.
1

238 Evaluările clienților

4.8 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

100 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
T
Good quality pots but definitely not "low tolerance".
TCSMD 11.10.2021
These are good quality pots, as expected from CTS. The tolerance isn't quite as tight as I would ideally want though. I normally buy CTS pots with tighter tolerances from other sources but I was running out of 500k pots and didn't have a new shipment coming in soon enough for a couple of jobs with high priority so I took a chance on these.

The actual values I got varied from 481k to 542k which isn't really tight enough for my needs. If one of my customers specifies 500k for an electronics upgrade I need the actual values to be a little closer than this. I guess it's within the tolerance for standard CTS pots but Thomann have these pots listed as "low tolerance" which they are most definitely NOT so that's one star off the total ratings for the misleading marketing.

To sum it up: The quality of these pots is very good but if you need them to actually be close to 500k you had better look elsewhere for pots with tighter tolerances (or buy a lot of them and hope you win the lottery).
Măiestrie
5
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
C
Big Improvement over cheap pots.
Christiansen 19.11.2020
I got a second hand Washburn with Seymour Duncan pups on it and I wasn't impressed how was the sound out of it. Not like I'm a professionist (more likely an sunday player) but the price was really low and guitar was in pristine condition so I bought it. The wiring was really bad and the pots were something no name and really tiny. So, I bought this pots, remade the wiring with SD wiring specs and damn, thru my computer with GR5 (dont have an amp yet) it's a big difference in how it sounds. It's a different quitar to be honest and high sounds are more clearer, changing the tone is actually making a difference (I got a Orange drop 22nf on it) and overall the quitar is turning out to be a 100% best deal. I don't know if the new wiring made this big change in sound, but I guess this new pots and cap made a huge difference. On the downside, I had to make the holes in the guitar and knobs a bit bigger for them to fit, but I knew that before ordering, couldn't find pots to fit exactly.
Măiestrie
0
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
S
range issue
Steph000 04.03.2023
Used as a tone pot with a fender .022uf capacitor mounted as typical 60s wiring, I get almost an on/off effect around 1 most of the course having close to no effect on sound.
Not sure if the pot or the capacitor is in cause.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
MJ
Worthwhile upgrade for any guitar
Martin John 17 17.11.2019
If you find your guitar is lacking ooomph then it could be your electronics. Many guitars come with sub-standard pots so even if the pickups are OK, you wont be able to hear it.

These are pretty much the standard in any high-end guitar, the first I do when getting a new cheap guitar is change the pots. Much cheaper than buying new pickups, and often has the same effect.
Măiestrie
3
0
semnaleaza un abuz

semnaleaza un abuz