Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
NOT (EASY) FOR A JACKSON (JS32T)!!!
I bought this specific P/N (6643) after a quick research (I found a youtube Graph-Tech video recommending this specific piece to improve Jackson guitars).
When I installed the piece (procedure was easy even for me!! - there is a Graph Tech video on youtube explaining it for newcomers) I found that 1E and 2B strings did not fit properly to the hole when strings are tuned, and they are extremelly low (touching the frets).
Then, I made a wider research and I have found a reference of an original Jackson nut replacement: 0096769000: Its dimmensions are 43.0mm lenght x 6.5mm width x 8.9mm height, 35.1mm from 6E to 1E... Height was the problem.
More researches... an "old" Graph Tech card found on the internet revealed that model 6010 is the recomendation for a wide variety of Jackson models, including JS32: Height is correct, but width is also small (4.9mm: the nut hole of the guitar is made for something close to 6mm), and the shape is not as the original nut (quite "squared" with long and straigh holes for the strings, same appearence than this 6643)...
Models like 6143 (not easy to found) or 6060 seems to fit better (you have to reduce some dimmension but it is supposed to be easy).... Nevertheless the shape problem remains...
Finally I gave a new opportunity to the 6643 (with proper lenght, widht, distance between 1E and 6E and shape) adding a piece of "credit card" properly reshapped and glued to the bottom of the nut to increase height... Now it is working, but it gave me hours of work, and I am not sure whether the solution will be durable and if the sound is as good as it should be without the glued piece of card (probably not).
A recommendation: before to install a new nut, put the old one in front of the new, and compare the dimensions: ensure that lenght and width are similar (or slightly bigger in the new one,... remove materal is easy) and once pieces are in front, check the height of each string one by one. New nut shall be similar or slightly higher (then, remove material of the "floor" of the nut until heights are similar).
CONCLUSION: If you need a Graph Tech TUSQ nut on your Jackson guitar, make a better choice than the one I made.
When I installed the piece (procedure was easy even for me!! - there is a Graph Tech video on youtube explaining it for newcomers) I found that 1E and 2B strings did not fit properly to the hole when strings are tuned, and they are extremelly low (touching the frets).
Then, I made a wider research and I have found a reference of an original Jackson nut replacement: 0096769000: Its dimmensions are 43.0mm lenght x 6.5mm width x 8.9mm height, 35.1mm from 6E to 1E... Height was the problem.
More researches... an "old" Graph Tech card found on the internet revealed that model 6010 is the recomendation for a wide variety of Jackson models, including JS32: Height is correct, but width is also small (4.9mm: the nut hole of the guitar is made for something close to 6mm), and the shape is not as the original nut (quite "squared" with long and straigh holes for the strings, same appearence than this 6643)...
Models like 6143 (not easy to found) or 6060 seems to fit better (you have to reduce some dimmension but it is supposed to be easy).... Nevertheless the shape problem remains...
Finally I gave a new opportunity to the 6643 (with proper lenght, widht, distance between 1E and 6E and shape) adding a piece of "credit card" properly reshapped and glued to the bottom of the nut to increase height... Now it is working, but it gave me hours of work, and I am not sure whether the solution will be durable and if the sound is as good as it should be without the glued piece of card (probably not).
A recommendation: before to install a new nut, put the old one in front of the new, and compare the dimensions: ensure that lenght and width are similar (or slightly bigger in the new one,... remove materal is easy) and once pieces are in front, check the height of each string one by one. New nut shall be similar or slightly higher (then, remove material of the "floor" of the nut until heights are similar).
CONCLUSION: If you need a Graph Tech TUSQ nut on your Jackson guitar, make a better choice than the one I made.
6
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Good fit for PRS SE guitars
3
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
L
Perfect fit to HB SC-450Plus
I asked Thomann for recommended part to upgrade my SC-450Plus and they suggested this nut. It fits perfect.
This was my first ever changed Nut on guitar :)
I changed the tuners as well, and I have completely different guitar.
Very happy!
This was my first ever changed Nut on guitar :)
I changed the tuners as well, and I have completely different guitar.
Very happy!
1
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
D
Great upgrade for guitar
After I put this nut in my PRS SE 24 and adjust it, tuning stability and overall sound got much better. If you don't have files (tools) for adjusting the nut, give the guitar to your luthier to change and adjust the nut.
Great quality material.
Great quality material.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
AL
Fits my 2013 PRS SE Custom 24
Bought it based on online reviews to replace the plastic nut in my 2013 PRS SE Custom 24. It fits perfectly. It definitely improved the tuning stability. You should notice some improvement right away, but do give it some time to break in.
Pros:
- Looks good and feels good
- Improved the tuning stability of my guitar
- Well-cut and well-lubricated
Cons:
- Nothing.
Pros:
- Looks good and feels good
- Improved the tuning stability of my guitar
- Well-cut and well-lubricated
Cons:
- Nothing.
1
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
Perfect fit for Harley Benton CST-24
Perfect fit for Harley Benton CST-24 - it went almost without modification in the old nut slot. It's much better fit there and has the proper shape for the string angle etc. The stock nut was complete garbage but with this one everything is perfect.
5
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Quality spare piece
In comparison with the plastic, this is more well shaped and strings remain stable upon it. So, in total material makes the difference.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
RS
Good nut
Good nut. Suitable for IBANEZ GRG170. Thanks.
2
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
AS
They are solid
Amazing quality I was impressed, definitely would buy again if needed.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
LU
Excellent as expected
Fitted my Wasburn HB-35 perfectly
0
0
semnaleaza un abuz