Gravity SP 3202 Studiomonitor Stand

485 Evaluările clienților

4.7 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Stabilitate

Măiestrie

286 Recenzii

Gravity SP 3202 Studiomonitor Stand
285 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Joi, 4.04. și Vineri, 5.04.
1
google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
PV
as a first monitor stand, I can wholeheartedly recommend this
Peter V_ 18.07.2019
Solid boxing, it has some good weight which is of course never a bad thing when it comes to any type of stands. Instruction manual is close to nonexistent, but it does not have too many parts and it's easy to figure out what goes where, so it's not a big issue.

One thing that sort of stood out for me is I could tighten the stem/body to the bottom piece without actually screwing it fully on, which gave me some freedom of rotating the upper piece but at the same time it wasn't straight and I'd assume if left like that it might tend to bend. I had to fully tighten it and move the whole piece around if I had to. Again, not a biggie unless you're cemented to your chair or constantly moving around. I'm using a pair of these for holding up studio monitors for mixing so I'm fine with this.

It wiggles a little bit when pushed (with weight on top of it) but other than that it doesn't budge at all. I'm not using the bottom spike screws only the rubber feet, I'd guess those could give me some additional stability but I'd rather not scratch the floor up with those. As the manual is 4 drawings in total I wasn't sure what to make of those.

In the end, this is my first ever monitor stands and I'm wasn't at all disappointed, I think I got good value for my money. Can totally recommend!
Măiestrie
Stabilitate
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
FP
The BEASTS of my HOME STUDIO !
Female Producer (Anna M.) 03.07.2022
Do studio monitor stands matter? Truly YES! In the Age of DIY production/mixing/mastering (bed-)rooms, as we try to keep unnecessary reflections out of our signal and monitoring paths for an uncolored sound. Monitors/Speakers on stands have a few advantages over floor/table standing brothers: apart from eliminating front wall & table reflections and thus minimizing comb filtering, it also minimizes diffractions and has a bass boost of 4-6 dB in the region below 200 Hz, that would usually radiate (diffract) to the back of floor standing speakers, making it a more efficient monitor. Your neck, shoulders, and back will also see the benefits of this control as you will be in a position self-designed for your comfort and convenience (!). Gravity SP 3202 Studiomonitor Stand features a heavy, triangular base made of cast iron and a 25x25 cm steel tray with isolating foam rests. These ensure effective coupling to the floor. If you have a cat - you can be calm in case she jumps out - your monitors will not fall down! 30 kg load capacity. It is tilt-adjustable by 10°(!) and height-adjustable from 90 to 150 cm for optimum speaker positioning. Very easy to control. I am happy with them! 😅
Măiestrie
Stabilitate
2
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
a
i expected more
arncht 10.02.2019
i wanted more space on my desk, but i cannot leave on these stands, i put the speakers back.

pros:
* more space on the desk
* good manufacturing quality

cons:
* the stand is simply not stable enough, they are wobbling
* the triangle base is sensitive from some directions
* it should start from lower height
* the spikes are slipping on the wooden laminated floor - my roomba pushed to the corner of the room
* negatively affected the sound
Măiestrie
Stabilitate
6
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
s
okay if I dont count the accuracy to quality
sadthoguah 20.05.2019
the stand is a disaster which shows me once and for all not to buy cheap stuff anymore!

after hooking it up (all the way correct to mention that) the device stood terribly unstraight. so I had to use the spikes first to fix one of the issues and that was to get the stand itself straight and.. after 5 or 6 corrections using the spikes in different positions the stand was straight. the second pro came with the top plate which for shame was also unstraight so.. I cut some paper and pressed it under one of the plates bottoms where the tending was to be unstraight downwards. after doing "all that" I got a well working stand for my mini dekker home studio hybrid homedisco/studio light effect. distastrous man, no cheap gear anymore.

the stand in its core is stable and the quality itself is good but I dont need a stand which isnt accurate after hooking up and putting down on the ground.
Măiestrie
Stabilitate
7
4
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
J
Fantastic Speaker stands
Josh Rainbow 04.02.2023
I recently bought 2 Gravity SP 3202 Studiomonitor Stands for my Genelec speakers. I am so happy I chose to buy these ones. They are rock solid - they not wiggle. My speakers are around 25 KG so it is perfect for these stands. For me they are the perfect stands in my home studio.
Măiestrie
Stabilitate
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
K
Very strong in mid height
Kaplamas 15.03.2022
As good as expected. Sturdy and safe but with a tiny -insignificant almost- wobbling in maximum height.
Măiestrie
Stabilitate
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
C
Had high hopes, was very dissapointed.
Collinwiththe1210's 26.06.2020
I bought these stands due to the fact thay stand taller than many other stands in it's catagory. After one day of use I noticed that the base on wich the monitors itself rest had not been welded on properly and thus the monitor and stand stands crooked. Very dissapointing.
Măiestrie
Stabilitate
3
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
nv
nomad video machine 20.02.2024
Good price, sturdy enough for me!
Măiestrie
Stabilitate
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
SS
Great, heavy but arrived with a bend on one of the supporting plates
Starving Shepherd 25.10.2021
Heavy base, should have the point of the triangle the same direction as the face of the speaker. One arrived with a bent plate (underneath the larger plate) but that was bent back into shape with a little brute force and didn't really affect the top plate.
My larger speakers (KRK 8s) are very stable and will return to upright with a reasonable wobble.
Măiestrie
Stabilitate
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
T
Not that stable....
Tom557 25.06.2022
0e4sonally i think the base is too small. They extend very high and are well made. Perhaps better for 6" speakers. The speaker tray at tge top is a little small for medium sized monitors. Quite a useful stand for other things....
Măiestrie
Stabilitate
0
0
semnaleaza un abuz

semnaleaza un abuz

Gravity SP 3202 Studiomonitor Stand