Klark Teknik Mic Booster CT1

166

Dynamic Microphone Booster

  • For dynamic or passive ribbon microphones
  • Gain: 25 dB
  • Power supply via phantom power
  • Frequency range: 10 - 20,000 Hz (± 1 dB)
  • Input and output: XLR
  • Dimensions: 24 x 25 x 78 mm
  • Weight: 100 g
disponibil din Mai 2020
numărul articolului 474739
unitate de vânzare 1 bucată(ăţi)
Channels 1
Number of microphone inputs 1
Instrument input No
Tubes No
Compressor/Limiter No
Equalizer No
De-Esser No
Phantom power No
Phase Reverse No
External effect loops No
Analogue Outputs XLR
Digitale Outputs 0
Headphone connection No
Level Meter No
Design Adaptor
B-Stock disponibil 199 lei din
218 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Luni, 22.04. și Marţi, 23.04.
1

166 Evaluările clienților

4.6 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Manipulare

Caracteristici

Sunet

Măiestrie

129 Recenzii

Ta
Excelenta la pret mic!
TheOne and Only 01.07.2023
Isi face treaba mai bine ca un Cloudlifter la 15% din bani. Ce mai vrei?
Manipulare
Caracteristici
Sunet
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
PR
pretty good.
Peter R. 438 18.01.2022
This gives me around 1/4 turn more, on (most of) my pre gain knobs, audio technica mic.
I have listened hard and cannot hear any conceivable sound colouring to my voice/harmonica, but mic'd up guitar/mic booster does sound a little "compressed", a few tweaks on the eq and the guitar sounds great. Passive DI & electric guitar, with this inline are "OK" too, but passive DI's tend to compress a little.
I like to see people at the back talking while I perform, so I don't "blast" the punters, any small variations in my "preferred sound" are not too important. A little Sound colouring doesn't matter at all to most live performer's.
So this mic pre is a great weapon to have in the bag when using "house PA's".
Manipulare
Caracteristici
Sunet
Măiestrie
3
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
G
Protect your ribbon mic and give it a boost!
GuitarOil 03.04.2022
I was living in constant fear of accidentally feeding my ribbon +48v Phantom Power by accident; now I don't. This is a great solution to protect your delicate mics while also reducing the need to add incredible amounts of preamp gain to hear them properly.
Manipulare
Caracteristici
Sunet
Măiestrie
5
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
C
It's cleaR, but not cleaN
CyberDNIWE 06.06.2021
Converting 48v phantom power into "clean" gain is ok, but
compared to Behringer UMC202HD's midas preamps, this thing is noisy. However, the noise seems to be not the typical high pitched whine of preamps, but rather a little bit lower one.

You also need a patch cable to connect it directly to the interface, because the male part has a very thick layer of metal around it and would siply not fit. Respectively, if you're ok with plugging it in the back of the mic, then no extra cables are required.

Conclusion:
If you have a decent enough preamp in your interface you dont need it. If you dont, then you probably will not care about a few extra db of background preamp noise. In the end, it does what it advertises to do, and for the price, it is enough.
Manipulare
Caracteristici
Sunet
Măiestrie
5
3
semnaleaza un abuz

semnaleaza un abuz

YouTube pe acerst subiect