Millenium MA-2050

1188

Table Microphone Boom Arm

  • With 5/8 "thread
  • For recording studios and multimedia workstations
  • Powder-coated surface
  • Included: Various screw and clamp mounts
  • Smooth adjustment with spring mounts
  • Length of the stand: Approximately 100 cm
  • Cable length: 300 cm
  • Maximum load capacity: 1.5 kg
  • Weight: 2.8 kg
  • Colour: Black
disponibil din Ianuarie 2004
numărul articolului 165296
unitate de vânzare 1 bucată(ăţi)
Type Microphone Boom
Height 0 mm – 1000 mm
Colour Black
Weight 1,4 kg
Mai mult
195 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Miercuri, 24.04. și Joi, 25.04.
1

1188 Evaluările clienților

4.3 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Stabilitate

Măiestrie

584 Recenzii

A
Raport ok pret/calitate
Androk 15.01.2023
Isi face treaba cu brio.
Măiestrie
Stabilitate
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
Male voices, something to consider
Muldor 01.10.2019
For the money this is a great table stand, but is had one major drawback: low frequency resonance in combination with a Shure SM7B.

When you touch it, or move something around on the table it's attached to the MA-2050 will produce a very audible +/- 30 Hz tone. This is off course also due to the weight of the Shure SM7B, not the smallest or most anorexic microphone. But it's a bit useless for me in this situation since my voice (over) sounds unacceptable thin when a high-pass filter successfully counters the effect of the resonating MA-2500.

I won't send it back, for the money it's an excellent stand that I could use for other purposes; but for the recording of a deep male speaking voice with the most commonly used dynamic microphone (that needs a whopping 60 dB's of amplification) this stand cannot be used without steep high-pass filtering.

Something that could have been noticed during the design process I guess, but again, at such a bargain... Maybe some elastic bands will dampen the effect, but I need something hassle-free..

Pros: Price & cable, brainless bargain.
Cons: Zhooooooooommmmmmmm.... when touched..
4
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
L
Does it's job
Lietu 29.11.2017
There's two main issues with the mount:

1. It comes with it's own cable, that doesn't seem particularly good in quality, and cannot really be replaced as it goes inside the frame.

2. At certain angles you end up having to fight the mount, the springs are constantly trying to put it in an angle you don't want it in.

Additionally some bits of the frame are perfect for cutting cables, if you accidentally end up with a cable between some of the moving bits you can kiss goodbye to the cable.

Other than that it's pretty much exactly what you'd expect. Put it on the edge of your table and you can swivel your mic around a fair bit.

It could be a bit longer in reach as well, but I wouldn't say it's a significant issue with this product - I'm sure I could just find a longer arm if I really needed a mount with a longer arm.
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
Well, this is a bit awkward
Maniac_Pony 05.04.2022
There's a big jump in price between cheap and good mic arms, and sadly this one falls in the former category on the cable routing. I can live with the XLR cable ends (OK, I
can't, I swapped them for Neutriks), the big let down was that the vertical arm traps and squashes the cable where it is routed in the base. A poor design, which also makes it impossible to pull the cable through when the lead isn't quite long enough for the position of the mic head. If it wasn't for the fact I needed to shorten the overall cable length and use starquad due to some nearby electrical interference, I would have sent them back.
Măiestrie
Stabilitate
0
0
semnaleaza un abuz

semnaleaza un abuz