Radial Engineering Tonebone Bigshot ABY/Y MKII

Arată traducerea

ABY Amplifier selector

Passive operation - no power supply required
True Bypass
Ground lift switch for output B
Phase reversing switches to match the phase orientation of the amplifiers
Switch for internal transformer isolation to eliminate hum
Toggle A / B foot switch
Both foot switch
6.3 mm mono jack input
6.3 mm mono jack tuner output
2 x 6.3 mm mono jack outputs
Power supply via 9 V DC power supply (not included) with polarity (-) inside and min. 120 mA
Status LEDs
Metal housing
Power supply only required for status LEDs
Dimensions (L x W x H): 96 x 92 x 52 mm
Weight: 560 grams
Made in Canada

30 Garantarea rambursării banilor în 30 de zile

3 3-Ani Garanţie Thomann

disponibil din Martie 2017

numărul articolului 409364

unitate de vânzare 1 bucată(ăţi)

Type A/B/Y

LED Display Yes

PSU Connector Yes

Shape Floor Effects Pedal

MIDI Interface No

Number Of Channels 1

Inputs 1

Outputs Per Channel 1

Grd Lift Switch 1

Design Footswitch

Mai mult

777 lei

Include TVA la care se adaugă 89 lei costul de transport

Livrare aprox. între Miercuri, 24.04. și Joi, 25.04.

Nivel de vânzări

în Pedale Comutatoare

Asta au cumpărat clienții care au văzut acest produs

Behringer ULTRALINK MS8000

485 lei

cumpărat

Radial Engineering HotShot DM1

829 lei

cumpărat

Harley Benton MiniStomp Intersection

98 lei

63 Evaluările clienților

5 51 Clienți 4 8 Clienți 3 3 Clienți 2 1 Client 1 0 Clienți

4.7 / 5

Caracteristici

Măiestrie

Recenzii ghiduri

37 Recenzii

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Nice ABY

Seungku 16.04.2018

I needed to run two amps at the same time, while I was recording. So, I was in hunt of nice ABY switch and this came up.

Pro: It has every features proper ABY switch should have. Built like tank, has enough LEDs so you know where your signal goes. On output [B], ground lift and isolation transformer to eliminate ground hums and buzz, can reverse polarity to prevent phase problem between two amps. Very effective and thoughtful.

Con: There's noticeable tone shifting when you engage 'Isolation transformer' on. So you had to tweak amp's knobs on output B again to get the sound you like.

If you are looking for proper ABY switch, look no further. Get this. I am giving just 4 stars because after recording, I hardly use it in actual gig or practice situations.

semnaleaza un abuz

Consideraţi această evaluare inexacă sau inacceptabilă din anumite motive? Vă rugăm indicaţi motivul părerii dvs în următorul câmp – dacă e posibil – adresa de e-mail pentru întrebări suplimentare.

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Great piece of gear!!

Katito 04.07.2017

Used to have problems with ground loops while playing in stereo, the noise was just unbearable. Since I purchased this well constructed metal chassis pedal everything works as it should, not to mention that both amps work in fase now. It's smaller than it seemed in the photos which is nice to save space in the pedal board. No power needed unless you want to know where you're at, and in that case the LEDs let you know if you're playing A, B or both amps. Probably the most robust pedal I have, I'm very happy with it! Highly recommended if you play in stereo!

semnaleaza un abuz

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

KIKI ARIKI 06.07.2020

So far this meets my expectations well. Have used it to send one signal to an amp with solid state preamp/ tube power amp, and the other signal going to DAW via a USBinterface. Very quiet. Also worth mentioning I used an isolated power supply. When tried with 2 Amps, the previously mentioned one and a Blackstar id core 40 v2, ground lift helped to remove some noise. However there was some higher pitched noise from the Blackstar. I suspect it is something to do with the digital amp circuitry. I am yet to try the device with two completely non digital amps. With both setup scenarios I did not notice any tone loss.

semnaleaza un abuz

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Solid and works!

Frednugent 29.05.2019

I love Raidial gear. Just found out about them and this is my 2nd piece in the last few months. Like the JDI this piece just does what it should in a really solid and clear way. Split your signal to A or B or have both playing. I just tried with vocals through 2 little amps for a live show and it worked perfectly. Its passive so you dont need power (unless you want the LED). It's a bit on the heavy side but still small. I can tell it's going to last for years. Solid, easy, small = Great.

semnaleaza un abuz

Citește toate recenziile

Radial Engineering Tonebone Bigshot ABY/Y MKII

ABY Amplifier selector

Asta au cumpărat clienții care au văzut acest produs

63 Evaluările clienților

Pentru a evalua produse trebuie să fiţi logat.

37 Recenzii

smart navigator

Produse vizualizate recent

Cumpărați și plătiți în siguranță

Beneficiile tale

Service

Servit cu dragoste!

Radial Engineering Tonebone Bigshot ABY/Y MKII

ABY Amplifier selector

Asta au cumpărat clienții care au văzut acest produs

Accesorii și articole compatibile

63 Evaluările clienților

Pentru a evalua produse trebuie să fiţi logat.

37 Recenzii

Compară opțiunile

smart navigator