Stairville LED Power & DMX Bar

401

T-Bar Truss

  • For LED-PARs or other DMX spotlights
  • 5 Protective contact sockets on the front
  • 5 DMX outlets on the front
  • DMX in- and output on the front
  • Power Twist input on the side
  • Includes 4 attachment screws for spotlights and a stand mount flange for easy setup on a speaker or lighting tripod
  • Power Twist cable included in delivery (corresponding replacement: Article Nr 187464)
  • Dimensions (L x H x D): 121 x 8 x 6 cm
disponibil din Februarie 2009
numărul articolului 114791
unitate de vânzare 1 bucată(ăţi)
633 lei
Include TVA la care se adaugă 89 lei costul de transport
Reduceri pe volum
Preț pe bucată Veți economisi Cantitate
633 lei 1
619 lei 2,2% 2
599 lei 5,4% 4
589 lei 7,0% 6
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Vineri, 5.04. și Luni, 8.04.
1

401 Evaluările clienților

4.5 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

Caracteristici

169 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
DD
Bracket distorted and became unsafe after fist use
Dj Daíthi 07.05.2017
I bought 2 of these a while back and never got around to using them. The other night I had a wedding to do and I said why not, I'll use them.Mounted 2 small moving heads on one of them (1 each side) and put a lazer on the top in the middle. After the gig, when taking down I noticed the bracket connecting the bar to my pole was distorted. Upon further examination, it is completely mangled because the bolt is welded to a very thin piece of metal. Should be at least 5mm thick steel for this kind of thing, but it's wafer thin. Going to contact thomann and send pics and hopefully they can replace the brackets without me having to send everything back.
Caracteristici
Măiestrie
4
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
N
Like it or hate it
Nuissl 27.05.2020
Nothing is perfect, but I like this one.

It is true there are some drawbacks, like the Powercons and XLR on the sides but it is useful if you place several bars in a row.
Then you can easily daisy-chain the bars with very short cables, so I think you should not use them as side bars because you want the cables in the center then.

Also it is right that the 35mm adapter is not roadie-proof ;) But hey, that is easy to fix.
The fifth connection is great to add some special FX or whatever.
Powercons are not Neutrik but feels good enough.
The general finish is fine but the total length of the bar is a little on the short side with 120cm.

So, for this money, and you have a good purpose for it I think they're great.
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
PK
Good idea, not so good execution
Peeter K. 19.08.2016
Bought two of these, because the premise sounds great - any speaker stand becomes a lighting stand, with integrated power and DMX signal connectors which saves time and cables. You could also possibly leave the lights attatched and connectedd so it's really easy to put the lighting together when doing similar gigs in a row. Unfortunately, the design is not thought out and the quality seems poor.
First, the bolts to attatch lights are too long, unnecessary screwing wastes time. Second, there are five power and DMX sockets, but there are only four bolts for lighting included. Third, the DMX and Powercon inputs are at the and of the bar. It would make a lot more sense to put them at the center. Fourth, the Powercon cable included is ridiculously short. Fifth, the speaker pole adapter is too wobbly. It could have used a big washer or larger contact surface, or maybe two bolts. And finally, after about 6-7 uses, the adapter attaching bolt just broke off. Will not bother with the warranty, I'll have a more suitable replacement part made. All in all, a lot of the problems described you can fix, but you shouldn't have to. They do have their uses, but I don't think I'd buy these again.
Caracteristici
Măiestrie
1
1
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
KB
great for the money
Klemen B. 24.01.2017
Like the product title said its a power bar for led lights.
simple to use, and it saves cables.
i have one but will buy a second one

would recomend
Caracteristici
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz