Stairville PCD-3 Power Twist Distributor

37

3-Way Power Distributor with Power Twist Input and Output

  • Ideal for power supply on stage or in the rig
  • Sturdy metal housing with flight option for the truss (2x M10 internal thread)
  • Power Twist input and output
  • 3 Protective contact sockets with covers
  • Conductor cross-section: 1.5 mm²
  • Dimensions: 205 x 73 x 63 mm
  • Weight: 0.6 kg
disponibil din Mai 2015
numărul articolului 358061
unitate de vânzare 1 bucată(ăţi)
Colour Black
Wire Diameter 1,5 mm²
Lenght [m] 0 m
Input Power Twist Blue male
Power socket outputs 3
Euro plug outputs 0
USB Outputs 0
PowerTwist Outputs 1
PowerTwist TR1 Output 0
IEC Outputs 0
UK Plug outputs 0
Switch No
Voltage protection No
Rack unit No
339 lei
Include TVA la care se adaugă 89 lei costul de transport
Disponibil în timp scurt (de obicei 2-5 zile)
Disponibil în timp scurt (de obicei 2-5 zile)

Acest produs a fost comandat și așteptăm să sosească în următoarele câteva zile

Informații despre livrare
1

37 Evaluările clienților

4.9 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

19 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
Ł
Sturdy but very tall
Łukasz 25.05.2020
Works as intended, very solid metal case, thick plastic sockets. The sockets are Type F: they are grounded but without a ground prong. The ground is clamped on both ends of the connector.

I haven't quite seen this by the pictures alone but the distributor is an entire 5.5cm tall from the ground to where the socket starts. Regular power extenders are 2cm from ground to socket base.

Luckily this was fine for my use case but make sure to measure, especially that the socket covers occupy additional space.

In case you were wondering, the sockets are indeed square but the internal wiring is cut to length so you cannot rotate them. Even if you could, there is not enough space for the socket cover holder when rotated.
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
e
Quality product
erbe 29.12.2021
Quality and robust product in the metal case.Neutrik connectors. I have more pcs, all without problems.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate de
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
Professioneller Bühnenstrom
Mr20Hz 07.01.2019
Ich habe mir zwei von diesen Verteilern gekauft um sowohl mein Rack (Bassamp) als auch mein Pedalboard mit Strom zu versorgen.
Vom Bassamp schleife ich nun einfach auf das Pedalboard weiter und habe keinen Ärger mehr mit eventuell nicht vorhandenem Bühnenstrom und auch nicht mehr das Gefummel mit Standard Mehrfachsteckdosen. Den Mit Hilfe der Gewindebuchsen und einer Gewindereduzierbuchse sind die Verteiler im Rack und im Pedalbord bombenfest fixiert. Besser geht es nicht.
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate fr
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
FJ
Robuste, bien construit, parfait
Franck J. 18.09.2015
Existe en 3 et 6 PC16. Toujours le petit regret qu'il n'existe pas de version purement française, mais 95% de mes prises sont compatibles, et j'ai des adaptateurs pour le reste.
Bien respecter à ne pas dépasser les 16A en cas de chaînage, mais avec la possibilité de mettre la rallonge Powercon de la longueur qu'on veut, c'est très pratique. Sur un pont, pour la distribution du PC Direct pour les machines à LEDs par exemple, c'est imbattable. Et mettre en chaîne ne mange pas une prise à chaque fois, comme sur les barrettes "traditionnelles".
Je vais petit à petit remplacer mes vieilles barrettes de prises en plastique blanc, de moins en moins autorisées...
1
0
semnaleaza un abuz

semnaleaza un abuz