the sssnake PPS1015

1602

The sssnake PPS 1015

  • 1.5 m Speaker cable, 2 x 1.5 mm² cross section
  • 6.3 mm Jack - 6.3 mm Jack
  • Suitable for passive speakers - not for active speakers
disponibil din Mai 2002
numărul articolului 153218
unitate de vânzare 1 bucată(ăţi)
Length 1,50 m
Connector 1 Jack 6,3mm TS male
Connector 2 Jack 6,3mm TS male
Cable Diameter 2x 1,5 mm²
19,60 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Luni, 22.04. și Marţi, 23.04.
1

1602 Evaluările clienților

4.5 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

483 Recenzii

S
Great
Stefan2121 11.07.2019
Cheap but well built cable, as always. Don't buy more expensive brands. They don't make any difference.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Good cable
Anonim 20.02.2017
This cable is intended to transfer power from an Amp Head to a speaker cabinet so it's a quite different item with respect to signal cables used to feed the amp from an instrument.

To be clear, signal cables have to correctly transfer voltage signal while power cables have to transfer both voltage and current information, a power signal at the end.

Depending on the power of your amplifier, tens or even hundreds of watts can be handled by this class of cables.
It becomes really important that the dissipation of the cable is minimized; this aim is achieved when the resistance of the cable is minimized.
And the resistance is minimized when both the cable length and resistivity of the copper conductors are minimized.
This is the reason why I've chosen a quite short cable.

About the resistance, the value this cable exhibits is negligible: my digital multi-meter is not able to correctly measure it because so low that it's below the instrument accuracy.

I do not use the cable for high wattage and I'm really satisfied with its performance.
The only feature I would reconsider is the jack shape: because the place I use my amp, a 90 degree connector is preferable. This is something I suggest you to evaluate before buying but this is NOT an issue with the cable; it's simply a matter of personal use constraints.
Măiestrie
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
It has not failed so far
Metalbert 04.12.2021
It's been a year using this speaker cable. It has not failed nor cause any equipment damage and also does not introduce noise. Considering the price, it's a solid ten!
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
i
Does the job intended!
iammatthewbirch 15.12.2021
Using this on a Micro Orange head, and a Jet City 2x12 from thomann. Certainly does its job, What else is there to say!
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz