Thomann LED Par Rain Cover 35 XL

31

Rain Cover for LED Pars

  • With this rain cover, your LED Pars will be protected from rain or other unwanted liquids (e.g. in clubs, etc.)
  • The LED Par Rain Cover is simply placed onto the lamp to cover it
  • This article is only designed to protect against spray water!
  • Thanks to the extreme transparency of the cover, the light output is almost unaffected
  • Dimensions: (L x W x H) 35 x 35 x 40 cm
  • Made in Germany
disponibil din Februarie 2013
numărul articolului 307813
unitate de vânzare 1 bucată(ăţi)
Accessory Type Rain protection
172 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Luni, 22.04. și Marţi, 23.04.
1

31 Evaluările clienților

4.7 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Caracteristici

Măiestrie

14 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
N
Just perfect!
Norty303 20.02.2015
I'm a laser show provider and I'd been wondering how I was going to weatherproof my laser projectors at outdoor festivals last summer. It turns out that these covers are pretty much exactly the same dimensions as my laser projector cases, so if I pole mount from underneath, the cover sits perfectly over the case and also the yoke underneath. This means there is enough 'skirt' to also cover the signal and electrical connections stowed underneath.
I had to cut a small aperture in the front to allow the laser beams out but as the front of the case is flat with no openings this didn't present an issue.
In use, we had a torrential downpour on the saturday night which lasted about 4 hours. When we closed the stage on Sunday morning one of the covers had formed a puddle on top, all the way to the seams on the edges. Not a drop of water had come in. Very impressive, especially considering what i was going to pay to have some made up! These will also probably be going out to Burning Man festival to work as primary dust defense for when the wind gets up.
Caracteristici
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
H
they should also make a mini version!
Henry9665 16.02.2017
great! They should also make a mini version of this to fit inside an F34 truss leg! I used the material for one of these covers to sow together 2 small custom covers in order to protect the Eurolite LED TL-3 TCL light units that light the truss internally - the units that are used on the truss legs are exposed to falling drinks on the dance floor and should be protected!
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
CE
Superb
CDS Events 27.08.2021
Now own a fleet of the rain covers from Thomann, all are superb. Very handy in the british climate....
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz