Thon Case 8x LED PAR64 Short

120

Arată traducerea

Custom-made Case

For 8 x Stairville LED PAR 64 short
Material: 7 mm Plywood
25 x 25 mm Aluminium edge
Min. 1 cm foam padding on the bottom
3 cm Convoluted foam in lid
2 Spring-loaded butterfly latches, medium
4 Folding handles
8 Compartments, each with the following dimensions: 27.7 x 27.7 x 39.7 cm
4 Steel ball corners on top
4 Stackable steel ball corners at the bottom
Exterior dimensions (W x D x H): approx. 1180 x 603 x 467 mm
Weight: approx. 23.0 kg
Colour: Phenol Brown
Made in Germany

30 Garantarea rambursării banilor în 30 de zile

3 3-Ani Garanţie Thomann

disponibil din Decembrie 2009

numărul articolului 239943

unitate de vânzare 1 bucată(ăţi)

Case category Headlight

Number of fixtures 8

Material 7 mm Plywood

Design of compartment Upholstered compartment

Wheels No

Locks And Catches 2x Butterfly

1.238 lei

toate prețurile includ TVA

Livrare gratuită așteptată între Marţi, 23.04. și Miercuri, 24.04.

Nivel de vânzări

în Cutii pentru Lumini

Asta au cumpărat clienții care au văzut acest produs

Flyht Pro CX Tour Case 4 Par64 Short

979 lei

cumpărat

Thon Case 8x LED PAR 56 Short

1.190 lei

cumpărat

Thon Case Par 64 4in1 Long / LED

1.169 lei

cumpărat

Thon Case 4x LED PAR64 Short

990 lei

120 Evaluările clienților

5 68 Clienți 4 42 Clienți 3 8 Clienți 2 2 Clienți 1 0 Clienți

4.5 / 5

Stabilitate

Manipulare

Măiestrie

Recenzii ghiduri

43 Recenzii

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Thon Case 8x LED PAR64 Short

StephenF 26.12.2014

I have been looking for a case to transport long Par 56 cans and Par64 LED's for some time. All the cases I have looked at are just a touch to small for the large Par 56 can's. I decided to try this case from Thomann, it looked as if it may just be large enough to take the cans, which it does with ease.
The inside base of the case is lined with a protective foam, so the cans can sit nicely protected and stable. The devisions make sure all 8 of the cans do not fall over in transport and get damaged.
Quality of the build is good, if a little flimsy. I noted that the dividers may need to have small brackets added to stiffen up the top sections. The 7mm plywood has a laminated brown finish which looks as if it will stand up to a little abuse.
Overall Thormann has come up with a good compromise between build quality and finished weight. Using a thicker plywood would have made the case much stiffer but added a lot of weight.
As this is a fairly big case I was surprised that I could lift it (all be it empty) out of it's packing box. When loaded with the lights it is still manageable, and the handles make it easy to move around and load. I decided not to fit wheels, as these would make stacking the case much harder, instead I use a trolly board if I need to move the case over long distances.
All the fittings are nicely cut into the plywood and all the rivets finished off well. I liked the way the quality ball corners will help the case stack in storage.
I have already decided to buy more of these cases to protect and transport my other sound and lighting gear.

semnaleaza un abuz

Consideraţi această evaluare inexacă sau inacceptabilă din anumite motive? Vă rugăm indicaţi motivul părerii dvs în următorul câmp – dacă e posibil – adresa de e-mail pentru întrebări suplimentare.

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Basic enough but does the job

Gerry5992 01.01.2019

First thing i would say is buy 4 castors (wheels) for this or you will die lifting it.
I have about 10 of these all at least 3 years old and all still ok.
It?s a cheap case for the money but it?s all down to how you handle it.
All of mine are still in perfect order. I use them for cans and also my arri lights fit in with a g clamp on so that?s a bonus

semnaleaza un abuz

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

A product that is great, but room for improvement.

Anonim 14.10.2016

I have two of these cases which i use to store LED cans. In one I can fit 8x Par64 LED cans + short DMX and power cables, in the other i use it to hold 24x Cameo 7x9w Flat LED par cans + 24 wooden floor stands/bases.

A bit too bulky and heavy (once filled) to capacity (or beyond) - wish it had wheels. Case is also liable to twisting and torsion. As such bigger butterfly catches could have been fitted.

The plus side is that they have been touring now for 2+ years with no damage to the case or significant corrosion to metalwork.

The case is very spacey!

semnaleaza un abuz

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Good quality flight case for parcan

Jinu 10.06.2015

Its a very good quality flight case for the par cans. Unfortunately its missing the wheels. With wheels its a perfect choice. Planning to buy one more for out other set of parcans.

semnaleaza un abuz

Citește toate recenziile

Thon Case 8x LED PAR64 Short

Custom-made Case

Asta au cumpărat clienții care au văzut acest produs

120 Evaluările clienților

Pentru a evalua produse trebuie să fiţi logat.

43 Recenzii

smart navigator

Produse vizualizate recent

Cumpărați și plătiți în siguranță

Beneficiile tale

Service

Servit cu dragoste!

Thon Case 8x LED PAR64 Short

Custom-made Case

Asta au cumpărat clienții care au văzut acest produs

Accesorii și articole compatibile

120 Evaluările clienților

Pentru a evalua produse trebuie să fiţi logat.

43 Recenzii

Compară opțiunile

smart navigator