Rockboard Flat Looper/Switcher Cable 60

140

Patch Cable

  • Length: 60 cm
  • Flat patch cord with a rectangular cross-section
  • Space-saving and extra narrow angled / straight jack plugs
  • Perfect for use on loopers, switches or effect pedals with closely spaced sockets
  • Flexible copper conductor: 20 x 0.12 mm
  • Wound copper shield: 34 x 0.12 mm
  • Polyethylene signal insulation
  • PVC external insulation
  • Capacitance: <10 pF / decimetre
  • Conductor resistance: <10 mOhm / decimetre
  • 6.3 mm mono jack plug
  • Operational temperature: -15°C to + 70°C
  • External dimensions of cable (W x H): 7 x 3 mm (rectangular)
  • External dimensions of plug (W x H): 12.5 x 7.5 mm (angled), 12.5 x 12.5 mm (straight)
  • Colour: Black
Tillgänglig sedan Augusti 2018
Artikelnummer 445210
försäljningsenhet 1 Styck
Colour Black
Length 0,60 m
Connector 1 Jack 6,3mm TS male
Connector 2 Jack 6,3mm TS male
Connector from 6,3mm TS Jack
Plug out Jack 6,3mm TS male
Visa mer
71 kr
inklusive moms, 99 kr frakt tillkommer
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
Leverans beräknas mellan Onsdag, 24.04. och Torsdag, 25.04.
1

140 Kundbetyg

4.8 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

hantverkskvalitet

58 Recensioner

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
p
First crack
portuguesepie 15.04.2019
After dozens of proper good rockboard cables, I have finally ran into the first issues. First, though, I must disclaim I'm not completely sure if the problem is exclusively with the cables, or if the pedal and/or power are also involved in the conspiracy - but the truth is that I'm using one of these cables in a Seymour Duncan Vapor Trail and noticed there's a great increase of noise/hum whenever my fingers get close to the cable, in the angled jack end, which is very off-putting.

If, on one hand, this isn't happening with the other pedals (where I'm also using these cables), leading me to believe there's no problem with the cable, on the other hand, when I switched to a couple of ernie ball cables there was noticeable decrease of earth noise/hum, which definitely means these cables weren't cooperating either, surely.

Anyway, having recently upgraded my power supply I'll be able to do some further troubleshooting when it arrives, and then I can better assess the situation in order to find the source of the problem. Surely this is only the first tiny crack in the otherwise great reliability of this brand, in my view, and even if now I'm a tad less eager to recommend this product, I will still give it a positive 3 stars until further evidence.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
R
Flat angle cable
RipChord 26.07.2019
The flat angle makes this cable a great tool for fitting things in a tight pedal or rack set up. A solidly built, pro cable.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
DL
Great Cables
Daniele Lupo 16.06.2020
Good quality cables, no noise, they don't break easily, take very little space, these have become the one and only type of cables I allow on my pedalboard!!! Defintely great product.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
h
Flat, flexible and great quality
hy-man 23.09.2022
Perfect for tight spaces without feeling flimsy or breakable. Snug fit for the longest loop setup on my small board. Very happy.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension