G
I would stop selling this
I am sorry for much negativity around this product. But it really is that bad, especially as it is meant to protect other equipment inside it and take the brunt of knocks and scrapes.
I use mine to transport a rack mounted mixer.
First off the material is made of corrugated plastic which with a press of the finger buckles and whites up the material. Also the hardware edging buckles very easily, I transport mine in the back of a car and even with a bag resting on top of it has buckled it causing the list to mate.
Spend an extra £20 and get a sturdy one made of hex board. It’s meant to be sturdy and take a small amount of abuse but I now have to buy twice to get a decent product and learnt the hard way.
I am not a fan of an abs case as I find the handles hard on the hands. As a positive I would say the handles on this were good. But the rest of it was terribly built!
I use mine to transport a rack mounted mixer.
First off the material is made of corrugated plastic which with a press of the finger buckles and whites up the material. Also the hardware edging buckles very easily, I transport mine in the back of a car and even with a bag resting on top of it has buckled it causing the list to mate.
Spend an extra £20 and get a sturdy one made of hex board. It’s meant to be sturdy and take a small amount of abuse but I now have to buy twice to get a decent product and learnt the hard way.
I am not a fan of an abs case as I find the handles hard on the hands. As a positive I would say the handles on this were good. But the rest of it was terribly built!
2
0
Report
C
Good value for light use.
As it says in the title, these are good value for money if you only need something that won't be "abused" too much and it's not worth spending lots of money on a case you could drive over.
These are a very good depth for A&H GLD AudioRacks.
These feel like quite a light corrougated plastic sort of material but they are strong enough to protect equipment from light bumps.
Unfortunatley one of the racks I received only had 6 nuts in one side of the the rail rather than 8, so only 3 units could be mounted. This wasn't a problem for me as I only had to install one 3U unit in it so I only needed 2 nuts per side. I also got another one and this has 8 on both sides, so probably not a common problem.
These did come with a full set of rack screws and nylon washers. This is very thoughtful as it prevents scratches on your equipment. You only need a screwdriver to install your equipment. :)
The lids from these are good for propping up monior wedges to get different angles too :)
These are a very good depth for A&H GLD AudioRacks.
These feel like quite a light corrougated plastic sort of material but they are strong enough to protect equipment from light bumps.
Unfortunatley one of the racks I received only had 6 nuts in one side of the the rail rather than 8, so only 3 units could be mounted. This wasn't a problem for me as I only had to install one 3U unit in it so I only needed 2 nuts per side. I also got another one and this has 8 on both sides, so probably not a common problem.
These did come with a full set of rack screws and nylon washers. This is very thoughtful as it prevents scratches on your equipment. You only need a screwdriver to install your equipment. :)
The lids from these are good for propping up monior wedges to get different angles too :)
0
0
Report
MM
Average product quality - Appallingly bad customer service
The Thon rack is of decent / average quality, it does the job and is good enough for home use.
However, before buying anything from Thomann note that their customer service is not there to assist you. They are inflexible and they are not interested in trying to find a satisfactory solution to a query.
However, before buying anything from Thomann note that their customer service is not there to assist you. They are inflexible and they are not interested in trying to find a satisfactory solution to a query.
0
0
Report
sk
an okay rack
bought this rack like 3 months ago no problems watchover the only problem i had it was when i received it it came with a serious hit on the botom end it was so serious that the plastic plate it was kicked out of the frame that was holding it, whoever i manage to fix it
0
0
Report
M
Light and reliable
I choose this model because I was looking for a low weight accessories in my live gigs. It's been a good friend for my last 20 concerts and it never give it up keeping my Behringer RX1602 and my Focusrite audio interface safe !
0
0
Report
C
Cheap and cheerful, but not for the road
This a good idea for gear that is going to sit in the studio, and never go anywhere. The build quality isn't great, and the sides seem to be made of a kind of corrugated plastic. All very flimsy really, and certainly no good for gigging gear. But if you just want something cheap to keep units tidy in the studio, it's fine.
0
0
Report
A
Great value / protection ratio
Bought this for my Soundcraft Ui16 and not disappointed - great quality at a low price.
1
0
Report
S
Used for floorbox
This has held up for several years now as the floor box of our folk club Soundcraft digital mixer.
0
0
Report
j
A light case of high quality
It simply does what you expect. Affordable price! I am using this rack case to protect my kemper rack amp and the amp fits there well. What I like to most about this case is the weight - it is just so comfortable to carry the case using the handle on the top.
If you look for a great case for your Kemper rack - just go for it. I highly recommend the 4U Eco II Compact 23.
If you look for a great case for your Kemper rack - just go for it. I highly recommend the 4U Eco II Compact 23.
0
0
Report
GL
As good as it gets
This is a perfect wee 19" rack box which i used for holding an Allen and Heath xone mixer. The clips as with all Thon case's are strong and tight and is nice and light so doesn't add any extra weight to the equipment!
0
0
Report
