Göldo TLB2C String Bushing Bass

26

Tail Sleeve for Bass

  • Diameter: 9.5 mm
  • Colour: Nickel
disponibil din Februarie 2014
numărul articolului 334754
unitate de vânzare 1 bucată(ăţi)
9,30 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Vineri, 24.05. și Luni, 27.05.
1

26 Evaluările clienților

4.8 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

9 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
DB
Simple yet Elegant
David B. 6946 08.04.2018
These were bought for a Harley Benton PB-50 mod project. Iwas going for the original 50's look so string through body was a must.

Since the PB-50 was ordered from Thomann it made sense to order the bushings too. The price was also better than I could find in the UK.

Very easy to fit. Once I'd position my 2 saddle bridge I bored pilot holes then flipped the bass over. A 9.5mm countersink finished the drilling. A tap with a rubber mallet saw the bushings secure.

If you want the bushings lying flush with the back of the body use a 12.5mm flat bit to the depth required (2mm I found) before using the countersink.

No "cons" were discovered. It's a very simple product that works well. Highly recommended.

You can see the finished PB-50 on bassic.de, basschat.co.uk, onlybass.com and talkbass.com. look for posts by kodiakblair.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
S
Solid and well made.
SeanMandrake 08.09.2015
Sturdy. Good quality. Appears to be a brightly plated brass. Ideal for an upgrade or, as in my case; retrofitting a bass string to a guitar. Only as deep as it needs to be so should fit thinner bodies well.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz