K&M 21105 Counterweight

164

Counterweight

  • For use with heavy microphones
  • Suitable for all one-piece K&M swivel arms with 3/8" thread connector or tube Ø 15 mm
  • Easy to mount
  • Outer Ø: 46 mm
  • Height: 60 mm
  • Weight: 0.8 kg
  • Colour: Black
disponibil din Ianuarie 2008
numărul articolului 200891
unitate de vânzare 1 bucată(ăţi)
79 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Marţi, 28.05. și Miercuri, 29.05.
1

164 Evaluările clienților

4.8 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

93 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
B
The missing link
Ben27 26.01.2021
Used on some (non K&M) stands in order to counter balance my heavier mics.

Most mic clutches tend to give over time, and this counterweight is the ideal counter to that. I don't think you'll ever be able to perfectly balance with one, but they take a lot of the stress out of the central clutch rubber.

Simple to install too - remove anything from the mic stand's boom, slide this on, reassemble. Solid weight and can be used to settle arguments with drummers.
Măiestrie
2
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
D
Very useful for balancing a boom
D_C 31.12.2020
Many microphone boom arms lack a counterweight to balance the microphone. I've seen people using extreme force to tighten the main locking screw to try to stop the boom drooping, which can damage the washers. With proper use of a counterweight, far less force is required. Two things are required to use this product: Firstly it is important to check that the boom has a diameter of 15mm. Secondly, it must be possible to slide the counterweight on to the pole. For a telescopic boom, I remove the plastic hand grip off the end (which can require a strong grip to twist it off) and plug the tube with a 15mm end cap (available on ebay). The counterweight can then be positioned close to the end if required.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
m
Improves standard mic stands
mjfe2 23.10.2017
We got one of these to 'upgrade' a hybrid stand consisting of a tall Manfrotto base and a conventional boom arm. The stand now works nicely for drum overhead duties where you wouldn't trust a normal stand to hold up a LDC mic. It's a shame the weight can't go to the very end of the boom arm because most have a lengthy plastic handle in the way but I can't see how else K&M could design the fixture.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
TC
Simple answer for heavier mics
The Computer & MIDI Doctor 08.11.2020
One of those handy things to have in your studio/ bag.
I bought K&M stands, thinking they wouldn't droop, but they did with my larger diaphragm mics. I began using my coat as a counter weight, but it looked pretty scrappy in the studio.

This is a simple, elegant solution.

I bought one to try out, and have bought more since then.

No more mic droop!
Happy chappy.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz