Miditech Midi Thru 4 /Filter

189 Evaluările clienților

4.4 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Manipulare

Caracteristici

Măiestrie

129 Recenzii

Miditech Midi Thru 4 /Filter
215 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Livrare aprox. între Luni, 25.03. și Marţi, 26.03.
1
google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Does the job beautifully, no latency, no power issues
Anonim 02.09.2016
Great price, great bit of gear! Works perfectly well for my set up.

I bought two of these as they are at a great price, and because my gear is all hardware with a fairly complex setup, and I found in multiple instances that even if a device (synth, MIDI controller etc) has MIDI IN and OUT ports, doesn't mean they both work simultaneously (I can't understand why) and obviously doesn't mean they can do MIDI thru or merge.

Also I don't need to have extremely strong build quality since they won't be moved from the desk.


So I'll outline my setup in case anyone with similar equipment is looking to know if these Miditech boxes will work ok. I suspect they will!
It's hard to put into understandable words (a picture would be better but I'll try anyway. You'd probably be as well drawing your own picture as you read down through this!)

I have Roland TR-8 Drum Machine with MIDI OUT port (master clock) going to Miditech box1 IN.
OUT1 on the Miditech box1 goes to a Korg Volca Beats IN port (for clock only, no need for MIDI controller control on the Beats) and OUT2 goes to IN on an Arturia KeyStep Arp/Sequencer. (There will be more devices added to the OUT3 and OUT4 at a later date. (Clearly, as you'll see from the rest of this, I'm completely addicted to hardware :)

So this keeps perfect clock time, no noticeable latency of any kind. No power issues with the Miditech box running off the TR-8.


Next, I have a Tascam FW1884 Mixer with inbuilt 4 IN / 4 OUT MIDI (2 IN > 4 OUT/THRU/MERGE simultaneously).

The KeyStep OUT port goes to FW1884 IN1 port (which passes clock to everything else).
A Korg Kontrol 49 MIDI controller OUT port goes to FW1884 IN2 port.

FW1884 OUT1, OUT2 and OUT3 ports go to a Volca Keys, a Novation Bass Station 2, and an Access Virus C Desktop ..for MIDI Controller control AND KeyStep arp/sequencing (and clock), on ALL of these synths.

FW1884 OUT4 port goes into second Miditech box IN port. Again, no noticeable latency or issues with power.

Miditech box2 OUT1 goes to the TR-8 IN (so some functions can be controlled by the MIDI controller such as scatter and sidechain).
Miditech box2 OUT2 goes to a Korg KP3, also so it can be controlled by the MIDI keyboard (ie: the hold button and effects volume).
Miditech box2 OUT3 goes to a Volca Bass.


Ok so all that's probably hard to follow but put as simply as possible, with all the gear tied together using two Miditech boxes, I can play and/or control a Volca Bass, Volca Beats, Access Virus C, Bass Station, TR-8, KP3 with the programmed K49 controller (specific synth determined by K49 scene and midi channel - just a 2 button press) AND I can play an arp or sequence with the KeyStep on any of the synths (excluding the Volca Beats) and switch between them very easily (again, specific synth determined by midi channel set on the KeyStep - also just a 2 button press). All latency free.


I am absolutely delighted with these Miditech boxes. No need for external power as they power off the MIDI IN device (although while I haven't had any issue myself, I believe some devices won't quite have enough power for it or won't pass the power through properly. This would not be the Miditech box at fault.)

I currently have no need for the filter on the Miditech boxes but tested it anyway and it worked very well. All switches off, everything gets through. One switch or more on, and the MIDI gets filtered accordingly.
Even if it didn't have the filter switches, they're still one of, if not THE cheapest 1 IN > 4 OUT/THRU MIDI boxes going. Not the strongest plastic shell I've ever seen but you should be fine if you don't get too rough with it.

Highly recommended!
Manipulare
Caracteristici
Măiestrie
15
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
O
Very handy to distribute MIDI from your soundcard
OSTU23 15.05.2020
I bought this to split up my midi out to connect various machines in my studio.
As many machines don't come with a MIDI through option it's impossible to daisy chain them, so I needed a splitter to connect them to my one midi out on my soundcard.
This device can do other things like filtering certain MIDI data, but I haven't used those yet. (I'm relatively new to larger MIDI setups)
As a split-box it is easy to use, basically plug and play. Connect the input to your MIDI out and then connect your machines to the 4 outputs.
There's no need for a PSU as the box is powered via the MIDI out. (Apparently there are devices where this won't work, so you may want to check this first, but my guess is most will. Again - check!)
The box does feel a bit plastic-y, so while it's good for studio use and the occasional live performance, I'm not sure how well it would deal with heavy gigging/touring.
I also find the placement of the LED that shows incoming data next to the input - which many will want to have on the back like me, a bit unfortunate, as it's not very well visible.
Other than that no complaints. At the price this is a very useful, decent little box.
Manipulare
Caracteristici
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
m
Handy little tool
minedfunk 25.01.2021
Useful and affordable midi thru box. It has filtering options for if you don’t want certain things like program changes sent.

I use this box to split the midi output of my Octatrack sampler to an FM synth, a korg volca unit, two small monosynth modules and a delay pedal that has a midi input, all of which sit on another table from the sampler. Used for clocking, and some sequencing.

It’s made out of (very hard) plastic, although the inclusion of rubber feet at the bottom is great! The grip allows it to double as a prop to give a faderfox PC4 modules a slightly steeper viewing angle, in my case.

After a couple years of use, no issues, I don’t notice any latency, still works like a charm. At this price I do not have anything negative to remark.
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
BC
021 Klinik:Room
Bankless Camp Alpha 21.11.2021
Just not to complicate too much; it does what was made to do. 5/5
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
CQ
Perfect for sequencing clock across a complex MIDI setup.
Chris Q. 28.09.2022
I use this to synchronize my modular rig with 2 other musicians using a Drumbrute, a Minilogue and a Maschine MKii. We clock off the Maschine, and rather than daisy chaining we use this as a single 'thru' to keep latency to a minimum and it works a treat. The fact that it powers itself is all the better!

As for the filters, assume they work, but haven't tried them.
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
P
Power needed!
Peak 30.01.2018
Works good, if you have power from your main midi in cable.
I was surprised that it haven't worked with Miditech's own Midilink mini and few cheap midi interface manufacturers-for beginners in midi especially- are giving warning/notice about whenever their product provides midi power or not.

From all other synth sources-Volcas (DIY midi out), Arturia's sequencers, Octatrack and so, I haven't problem at all.
Having midi splitter (and filter) without batteries/power cables is great and I would buy another in some time.
Manipulare
Caracteristici
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
o
Super useful device, if you use less then 4 midi outs.
omino 19.01.2021
After some time of use, I have to tell that often one of my 4 midi devices connected to this box loose communication. My midi/clock sender is an Elektron Digitone and the device and the port loosing connection is completely random. Useful device if you use less then 4 midi devices.
The building quality is not the best (plastic) but it's compact and lightweight.
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
L
Great for daisy chaining
Lomber 16.01.2021
I daisy chained this with a Kenton-5 and it works great. No latency, and no issues at all.
I bought this because it's the cheapest you can find, so I haven't utilized the filter function yet. I just use it as a thru box.
As for the build, it does feel a tiny bit cheaper than let's say a Midi Solutions alternative.
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
H
Midi swiss knive
Hansbaas 09.11.2019
This little box can filter any midi signal. Very handy. I already use three of them, to filter out midi real time data, or to filter out the lock signal. This is the swiss knive of midi. Good quality and it is powered by the midi signals themselves, very convenient.
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Unreliable / Defective unit?
ArneV 23.01.2021
It will only turn on when one of the four inputs is plugged in. So when starting up I first have to unplug all but 1 output cable. Using pitch bend / mod wheel also turns off the device. Will return it because it is not reliable. Better option is to use something with external power.
Manipulare
Caracteristici
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

Miditech Midi Thru 4 /Filter