Neutrik NC3 FXS

204

XLR Connector

  • Female
  • With switch: on / off switch for microphones that do not have their own switch
  • When switching off, contacts 2 and 3 are short-circuited
numărul articolului 105169
unitate de vânzare 1 bucată(ăţi)
Connector Type Female
Installation No
Gold Contacts No
Angled No
Plug XLR 3-pol female
74 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Vineri, 26.04.
1

204 Evaluările clienților

4.6 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

84 Recenzii

d
Lucru de calitate !
danmusic 22.09.2017
Pentru microfoanele care nu sunt prevazute cu buton on/off, acest produs este unul chiar foarte necesar. Folosesc de ceva timp si pana acum nu am intampinat niciun fel de problema.
Recomand!
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

CN
Un accesoriu necesar
Cristi N 17.12.2018
intrerupatorul rigid la primele folosiri
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

dc
nu are contact bun pe swith
dan ciolacu 05.04.2023
butonul on off nu face contact cateodata si creaza un sunet deranjant in amplificator
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
E
Works well, but silent only with dynamic microphones!
Erki. 07.04.2020
My setup: 2 microphones - a JTS NX-8 (dynamic), NX-8.8 (condenser) and a Yamaha StagePas 400 powered mixer to plug them in. Cheap and good mics by the way.

With the dynamic mic it works wonderfully. It sometimes, not always makes a tiny, very soft pop when switching on, but it's not a problem. It is also possible to unplug and re-plug the microphone, when the switch is off, no noise is heard. Phantom power doesn't make a difference in this case.

With the condenser mic and, obviously, phantom power, it's another story. Switching on and off generates pops, not horrible, but still very well heard. But NEVER connect or disconnect the mic without muting the mic channel first! Even when the switch was off and volume was at a reasonable level, I was worried about blowing my speakers with those pops. Gladly everything still works. Maybe it depends on the mixer too, but better safe than sorry.

Also the plug is quite long, about twice as long as normal XLR plugs. This isn't an issue for me, but may be for some applications.

Quality seems good - it's a Neutrik after all.
Măiestrie
2
0
semnaleaza un abuz

semnaleaza un abuz