Thon 12U Live Rack rail

11

Rack Rail Mounting Set for 12 U Live Rack

  • For self-assembly in Thon Live Rack 12 U
  • 2 Rack rails equipped with nuts and rubber piping
  • Fixing rivets
  • M6x12 rack screws with matching washers
  • Wooden shim plates
disponibil din Ianuarie 2022
numărul articolului 535190
unitate de vânzare 1 bucată(ăţi)
Rack Rail Yes
115 lei
Include TVA la care se adaugă 89 lei costul de transport
în stoc
în stoc

Acest produs e disponibil în stoc și poate fi expediat imediat.

Informații despre livrare
Expediere preconizată până Luni, 29.04.
1

11 Evaluările clienților

4.7 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

6 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
w
Good if you're happy to do a little DIY
wriggy_b 13.06.2022
No instructions supplied, which is fine - it's pretty easy to figure out.

The rivets were not the right size for the holes in the rails so I had to redrill. The rivets themselves were very hard to install using the rivet gun that I purchased from thomann in the same order. I don't know if this was the rivet or the gun, but it was pretty hard going!

I was using this kit for a potentially different rack series, so had to cut away some of the extrudate to get it flush (because of other rivets in my existing rack) but it seems to have worked well and is fit for my use.

Lots of bolts, nuts and washers came with the pack, which is welcome.
Knocked off the star for the total because of the need to redrill, but quality is as expected.
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
R
Don't buy for flyht racks
RemusD 14.10.2022
Bought this to add rails at the back of my flyht rack. I had to buy a special tool for the rivets, but you can also buy screws if you want to. At first I installed with the given wood distancers, but it won't fit any 19'' rack because it's to narrow. I the removed them and reattached without the distancers and I managed to fit a power strip from thomann, but other rack equipment doesn't fit, the ears don't line up with the rais.

As for quality they are very sturdy and better then the rails provided from flyht cases.
Măiestrie
1
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Passt!
Andu1701 18.03.2022
Lässt sich ohne große Probleme installieren, Zubehör ist alles dabei. Funzt!
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz