Doepfer A-162

25

Módulo para sintetizador modular A-100

  • Delay con disparador dual para disparar señales
  • Permite retardar la salida de una señal de entrada 'trigger'
  • Consumo de corriente: 40mA (+12V) / -0 mA (-12V)
  • Anchura: 8TE / 40.3mm
  • Profundidad: 45mm (medido desde la parte posterior del panel frontal)
Disponible desde Octubre 2004
número de artículo 154957
Precio por 1 Unidad(es)
Ancho (unidades TE / HP) 8
62 €
IVA incluido. 15 € de gastos de envío adicionales
En stock
En stock

Este producto está en stock y puede ser enviado inmediatamente.

Información sobre envíos
Previsión de envío el Sábado, 27.04.
1

25 Valoraciones de los clientes

4.8 / 5

Para poder evaluar un producto deber estar registrado en su centro de clientes.

Importante: Con fin de evitar evaluaciones en base a rumores o mitos populares, solo permitimos en nuestro website evaluaciones por clientes que hayan comprado el producto con nosotros.

Tras de acceder a su centro de clientes encuentra en Centro de clientes "Evaluar productos" todos los artículos que puede evaluar.

Uso

Características

Fabricación

15 Reseñas

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
VW
Doepfer support is NON PLUS ULTRA
Vladimir Woelfl 25.08.2021
I modded mine to get really short delays (less than ms), didn't work right at first, but then I got a reply from Dieter Doepfer himself 😁
I did what he wrote me, and now it works exactly as I want it to.

In case anyone else decides to change the timing caps - first note that this *voids warranty*, so if you're not experienced with electronics, don't mess with it.

I used 330nF for C2 and 100nf for C5.
This is what Dieter Doepfer wrote me:

"If the value of capacitor C2 (10u) is reduced too much the first unit (delay) does no longer trigger the second unit because the pulse becomes too short. An additional resistor at the trigger input of the second unit (pin 8 of the NE556) to GND will help to solve this problem (1M should work, we tested it with C2=470nF). In addition the resistor R4 can be increase from 220 Ohm to 1k. R4 defines the shortest time and is in series with the potentiometer."
Uso
Características
Fabricación
2
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
A
trigger delay with huge range
Anónimo 24.10.2016
A dual module that offers a number of possibilities. I use it to adjust the gate time of a clock signal or to divide down the clock signal (these are both done with just the gate length control). With a logic module interesting rhythms can be created very simply and with asymetrical patterns or swing. I also use it to add delayed vibrato and other modulations to my sounds. The delay can be exceptionally long as can the gate length. And of course the all important LEDs to let you know what the module is doing.

I have only rated the sound as okay as this module doesn't produce or modify sounds itself (although if you put an audio signal through it you get a really crunched up distortion!)
2
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
d
Eindelijk
dhoinjo 18.04.2019
Blij dat ik dit geprobeerd heb. Sommige van mijn sequencers sturen de gate iets te vroeg waardoor het voltage nog niet helemaal stabiel is en resulteert in ongewenste noten. Met deze module is dat verleden tijd. En dat is maar een van de mogelijkheden. Goedkoop bovendien. No brainer!
Uso
Características
Fabricación
0
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
e
Good
exmojoao 19.02.2020
It works fine i use it too to convert a longer gate into trigger with delay and length at minimum.
Uso
Características
Fabricación
0
0
Reportar evaluación

Reportar evaluación