EMG H3 Black

43

Pickups for Electric Guitar

  • Passive humbucker
  • With over wound coils and ceramic magnets
  • Hotter than a traditional PAF
  • Very balanced sound with a transparent, ​​slightly lowered mid range and clear treble with great overtones
  • For neck and bridge position
  • Pole distance: 9.85 mm
  • Colour: black
  • Incl. EMG solderless installation system: 500k volume potentiometer, 500k tone potentiometer, output jack, two pickup in/ out bus, fixing screws & springs, pickup cables, 2x connection cables, output cable and grounding cable
In catalogo dal Ottobre 2010
Numero di articolo 254754
Unità incluse 1 Pezzo
Active No
Output High
Kappe Yes
Colour Black
Position Bridge, Neck
€ 89
IVA inclusa,€ 15 di costi di spedizione aggiuntivi
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

43 Valutazioni dei clienti

4.6 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Suono

Qualità

26 Recensioni

A
Pickup EMG H3 Black
Anonimo 23.07.2016
Ho acquistato questo pickup per poter "potenziare" una Ibanez RG370DX montandolo nella posizione del ponte e devo dire che ha sonorità molto accattivanti anche se non era quello che mi aspettavo del tutto. Per intenderci, io cercavo un pickup con dei bassi prominenti e degli alti quasi del tutto inesistenti; in questo pickup invece c'è un minimo eccesso di alti che lo portano al millimetro della perfezione.
Suono
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
Doesn't fall victim to EMG syndrome!
Anonimo 24.01.2015
This pickup is great and it doesn't fall victim to the EMG syndrome where most EMG pickups sound the same as you can tell this does not have your conventional Alnico V magnets but Ceramic magnets and you can really tell, it is a lot more punchy and kicks the metaphorical balls of the top end, it really does sing, it even has a Dimebag quality to it so if you have a Floyd Rose equipped guitar and want to replace the bridge pickup to get massive squeals then buy this pickup and drop it in you wont be disappointed!
Suono
Qualità
2
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
B
Just Wicket
Brocco 30.09.2023
I modified an ST to an HSH configuration with these little buggers on neck and bridge position respectively (the middle one is still an EMG single coil for mixing)
The sound is really full and round yet still gives some "straty" quality to the overall tone. To me, it sounds still sharper than a genuine 335 Humbucker, foremost on the neck position, which was exactly what I wanted.
Using the included roll-back (which is sadly not optional, otherwise the entire configuration looses its solder-free quality) knob can still make it sound more "jazzy" (more like the one on the 335)
Only down side - with the solder free option, as mentioned before, only genuine EMG parts can be used. But since they are made to fit together perfectly anyway, that's not really a draw-back to me.
All in all I'm totally impressed.
Suono
Qualità
1
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
t
highly recommended neck pickup
t-j-b 04.11.2015
I use the passive EMG H3 in the neck position of a Flying V with an additionally push/pull pot to coil split the pu.
You can play the typical EMG metal tones and even jazzy clean or other non metal music with this pu.
A coil splitted H3 will also sound very nice but it needs some soldering. It does not turn your V into a single coil Strat but it's sufficient to get a nice clear sc chime. The coil splitting is not working by design, you have to get a switch or push/pull pot and solder by yourself which is then not a "quick connect" solution.

Great pickup, highly recommended!

I only wish EMG would sell more quick connect stuff for passive humbuckers like they do for their active series e.g. switches, pots.
Suono
Qualità
0
1
Segnala un abuso

Segnala un abuso