MXR M 239 Mini Iso-Brick

46

Multi-Power Supply for Effects Units

  • Max. total power 2,000 mA
  • All 5 outputs are completely isolated
  • Separate status LED for each output
  • 4x 9 V Outputs, each with 300 mA
  • 1x Output with selectable voltage (9V/18V) loadable with 800 mA
  • Input voltage: 18V DC 2,000 mA
  • Aluminium housing
  • Incl. 5x power cables (angled/straight barrel connector, 2.1 x 5.5 mm), 1x power splitter cable (barrel connector, 2.1 x 5.5 mm) and 1x 18 V DC 2,000 mA (Dunlop ECB 009) power supply (2.1 x 5.5 mm hollow plug, negative polarity inside)

Note: Register your product at www.w-distribution.com/Warranty to extend the warranty to 4 years.

In catalogo dal Marzo 2019
Numero di articolo 459673
Unità incluse 1 Pezzo
DC/AC current AC/DC
Output current in mA 2000 mA
9 V Yes
12 V No
18 V Yes
Secondary voltage No
Multi-output power supply Yes
€ 117
Spedizione gratuita, incl. IVA
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

46 Valutazioni dei clienti

4.8 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Qualità

31 Recensioni

b
Potentissimo e piccolissimo
botta72 07.06.2022
E’ veramente minuscolo: 10.8 x 4.9 x 3.5cm, e pesa solo 70 grammi.
Il cavo splitter ad “Y” fornito in dotazione, si può usare anche per aumentare la corrente: infatti basta collegare i due connettori ad angolo retto all’iso-brick, e l’altro capo al pedale. In questo modo riesco ad alimentare i 900mA del Line6 HX Stomp (con adattatore per connettore da 2.5mm). Ci alimento contemporaneamente anche i 300mA dell’Eventide H9 ( qui basta un adattatore da 2.5mm con polarità inversa).
Con questi 2 pedali collegati, l’iso-brick si scalda parecchio, ma funziona perfettamente.
Qualità
1
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
j
Good powersupply for a small but demanding pedalboard
jondelange 17.03.2022
The isobrick delivers clean power and immediately fixed the buzzing sound in my pedal chain. It's built sturdy and because it's pretty light I was able to fixate it underneath my pedalboard with the same velcro I use for my pedals.
One small issue I have to address is that when you move your pedalboard around, some of the cables might get a bit loose because the fit isn't very tight, so you have to check your connections after moving your board.
So with just one small easily fixable issue aside, this is a great powersupply that easily supplies enough power for some powerhungry pedals like my plethoraX5 and Source Audio Aftershock
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
U
Awesome
Umby 17.09.2019
This power supplier is really awesome!
You can place it in smaller spaces without problem. (ex Nano pedaltrain)
It offers 4 9V power slots plus an additional 9V/18V switchable slot.
I used it for hours under super hot conditions and it never failed.
I would recommed it to everyone
Qualità
2
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
i
Tiny but powerful.
ilikeinstruments 20.03.2022
With roughly half the size of a deck of cards it's been powering 4 pedals (2 of them being multieffect) with ease without failing or becoming a hot potato.
Qualità
0
0
Segnala un abuso

Segnala un abuso