One Control Black Loop - A+B Switch

21

A + B Switch and True Bypass Looper for Effects Pedals

  • The foot switches provide control over two independent send / return loops
  • Can be used as a tuner output / mute switch
  • 2 DC barrel connector outputs (2.1 x 5.5 mm) for looping through the power supply
  • True bypass
  • Loop 1 foot switch
  • Loop 2 foot switch
  • Status LEDs
  • 6.3 mm Mono jack input / output
  • 6.3 mm Mono jack send / return
  • Power supply via optional 9V DC power supply (2.1 x 5.5 mm barrel connector, polarity (-) inside - not included)
  • Current consumption 4 mA
  • Passive operation without power supply possible (status LEDs and DC barrel connector outputs without function)
  • Metal housing
  • Dimensions (L x W x H): 65 x 120 x 46 mm
  • Weight: 200 g

Note: Battery operation not supportedNote: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.

Nota bene Registra il tuo acquisto presso www.w-distribution.de/en/Warranty per una estensione di garanzia a 4 anni.
In catalogo dal Luglio 2020
Numero di articolo 499664
Unità incluse 1 Pezzo
Type A/B
LED Display Yes
PSU Connector Yes
Shape Floor Effects Pedal
MIDI Interface No
€ 70
IVA inclusa,€ 15 di costi di spedizione aggiuntivi
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

21 Valutazioni dei clienti

4.7 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Caratteristiche

Qualità

14 Recensioni

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
PJ
Buttons are loud and not of good quality+
Phoney Johnny 16.05.2022
The sound of the buttons is pretty loud. And I got couple of times when the tip of the button got off. It isn’t really attached. So the buttons are not of best quality. The box is made of heavy metal, feels reliable. Works well as true-bypasser pedal. I use it to bypass some buffered pedals. The pedal takes one 9V power source and has output for two another. So it works as a splitter for 9V power. I found this feature useful, it helped me to organize the power supply on the pedalboard. If not buttons quality it would be really good unit.
Caratteristiche
Qualità
1
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
MX
Just perfect
Miltos Xp 13.03.2024
Build like a tank.
4 years warranty
Some good routing options

Ps1: Lets say that loop 1 is active and you want to turn off loop 1 and activate loop 2, in order to do that you have to press both switches at the same time.

Ps2: Before you buy check the other one control switches to make sure which one suits you best. I did some reading and i watched some videos to make sure it is the right one.
Caratteristiche
Qualità
2
0
Segnala un abuso

Segnala un abuso

google translate de
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
KH
Gut, aber laute Schalter
Kai Herrmann 04.01.2021
Funktionsweise:
Sind beide Schalter aus, geht das Signal direkt vom Input zum Output. Sind Schalter A und/oder Schalter B eingeschaltet, wird der jeweilige Kreis (mono) aktiviert.
Die beiden Kreise A und B werden hintereinander, nicht parallel angesteuert. Das bedeutet: (1) Wenn z.B. Kanal A aktiviert ist, kommt bei Kanal B (und beim Output) nur ein Signal an, wenn von Kanal A auch etwas zurück kommt. (2) Wenn Kanal A aktiviert ist, kommt bei Kanal B nur das schon veränderte Signal an.

Qualität:
Ich kann keine Veränderung von Klangfarbe ober Pegel feststellen.
Die Verarbeitung wirkt stabil.
Einziges Problem (deshalb 1 Stern weniger): Die Schalter sind recht laut. Wenn ich den Switch (zu Hause) mit einer akustischen Gitarre verwende, ist das Knacken über das Gesangsmikro deutlich zu hören. Auf einer Bühne sollte das aber kein Problem sein.
Caratteristiche
Qualità
3
0
Segnala un abuso

Segnala un abuso

google translate de
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
s
Solide verarbeitet
sangmister 30.10.2020
Es gibt wenig Spektakuläres zu berichten - das Ding macht genau das, was es soll. Die Nebengeräusche und der Gesamtsound meiner Gitarre am Amp haben sich deutlich verbessert, weil das Signal jetzt nur noch dann durch die Effektschleifen muss, wenn ich das auch will.
Die Verarbeitung ist super - solide und stabil!
Caratteristiche
Qualità
0
0
Segnala un abuso

Segnala un abuso