ObsidianWire ST 7-Way ST HSS/HSH Harness

2

Solderless Electronics Replacement Set for Electric Guitar

  • For ST-style electric guitar with HSS or HSH pickup configuration
  • Play the neck and bridge pickup or even all three pickups together
  • Function switch in the push/pull tone control, no additional modifications required
  • Intelligent circuit: 500 kOhm for humbucker & 250 kOhm for single coil
  • Internally switchable between an HSS and HSH pickup configuration
  • High-quality components provide a significant improvement over standard electronics
  • Solderless plug-in wire connector for quick installation and easy pickup changing
  • Controls: volume, tone (neck & centre), P/P tone (bridge & 5-way switch function)
  • Made in New Zealand

Switch positions:

  • HSS P/P Switch Down: 1: Bridge, 2: Bridge (Split) & Middle, 3: Middle, 4: Neck & Middle, 5: Neck
  • HSS P/P Switch Up: 1: Bridge & Neck, 2: Bridge (Split), Middle & Neck, 3: Middle & Neck, 4: Neck & Middle, 5: Neck
  • HSH P/P Switch Down: 1: Bridge, 2: Bridge (Split) & Middle, 3: Middle, 4: Neck (Split) & Middle, 5: Neck
  • HSH P/P Switch Up: 1: Bridge, 2: Bridge (Split), Middle & Neck, 3: Middle & Neck, 4: Middle & Neck (Split), 5: Neck

Scope of delivery:

  • Volume control: 1 CTS 250 kOhm, short shaft, finely ribbed slotted shaft (24 spline for US guitars & pot knobs)
  • Tone control: 2 CTS 250 kOhm, short shaft, finely ribbed slotted axle (24 spline for US guitars & pot knobs), 1 push/pull
  • Capacitors: 150 Series Polyester Film 0.022µF
  • Switch: Oak Grigsby 5-way blade switch
  • Jack socket: Switchcraft
Référencé depuis Janvier 2024
Numéro d'article 580093
Conditionnement (UVC) 1 Pièce(s)
Type Normal
Résistance 500/250 kOhm
Caractéristique Logarithmique
Longeur du filetage 6,4 mm
Potentiomètre tandem Non
Push/Push Non
Sans soudures Non
Type d'axe Cranté
Couleur Chrome
145 €
Tous les prix TVA incl. (TTC)
Disponible immédiatement
Disponible immédiatement

Cet article est disponible en stock et peut être envoyé immédiatement.

Informations sur l'expédition
Livraison gratuite estimée entre le Jeudi, 2.05. et le Vendredi, 3.05.
1

2 Évaluations des clients

5 / 5

Vous devez être connecté afin de pouvoir évaluer un produit.

Note: Afin d’éviter que les évaluations de notre site soient polluées par des “ouï.dire”, des approximations ou encore de la publicité clandestine, nous autorisons uniquement nos clients à évaluer les produits achetés chez nous.

Une fois connecté, vous trouverez dans votre compte client, via le lien "Évaluer des produits", tous les articles que vous pouvez évaluer.

Qualité de fabrication

2 Commentaires

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
f
Obsidianwire are my "go to" solderless harnesses
fommof 10.02.2024
I started using exlusively Obsidianwire harnesses since 2020 (two traditional strat harnesses, one with Blender, and two HSS).

I bought this to replace one of my old HSS harnesses, I was only interested in the HSH mode (there is a HSS/HSH on the PCB) switch but I also wanted to have the extra pup combinations available so I opted for the 7 way switch.

Qualitywise, Obsidianwire is top notch. End of story.

This one can also do (via the Push/Pull on Tone 2) Bridge+Neck and Bridge+Middle+Neck.

If you are not like me, always operating my pups on full humbucker mode, this harness can autosplit (just use all four cables of your humbuckers instead of two).

My strats are Fender Japan (CIJ and MIJ) and these harnesses fit just fine. The same goes for the MIA strats.

So, if you are sick and tired about soldering, just find the proper Obsidianwire that meets your requirement, install it, and forget all about it. Works great for guys and gals that are experimentng with different pickups all the time.
Qualité de fabrication
2
0
Signaler l'évaluation

Signaler l'évaluation

google translate de
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
C
ObsidianWire ST 7-Way in einer 2011 Fender Mexico Strat
Chris93 15.03.2024
Super einfach zu installieren/ Verbauen. Haltet euch an die Anleitung. Am besten ihr geht auf die Website von Obsidian Wire, dort gibt es auch mehr Informationen zum Beispiel: Kabelfarben der einzelnen Tonabnehmer Hersteller.

Klanglich würde ich mit meinem leihenhaften Gehör sagen das es deutlich besser klingt als die verlöteten Standard Potis.
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation