Behringer CP35 Attenuators

7

Eurorack Module

  • 4 Passive attenuators with normalised inputs
  • 4 Outputs for a fixed reference voltage (2x +6 V and 2x -6 V)
  • 2 Passive 4-jack multiples
  • Current draw: 1 mA (+12 V) / 1 mA (-12 V)
  • Width: 21 HP
  • Depth: 35 mm
In catalogo dal Maggio 2020
Numero di articolo 490731
Unità incluse 1 Pezzo
Modul Type Mono
Width 21 TE / HP
B-Stock da € 51 disponibile
€ 67
IVA inclusa,€ 15 di costi di spedizione aggiuntivi
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

7 Valutazioni dei clienti

4.7 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

uso

Caratteristiche

Qualità

3 Recensioni

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
t
Very useful sub control CV line.
toshino 25.05.2021
This module divide 3 areas.
Upper area is ATTENUATORS,
This area function same to "995 ATTENUATORS" , but this CP35 has 4 volumes and outputs.
Normally use Attenuators, input signal add upper left side inputs, and return each gain down control voltage with volume, and output to down side .

Next one is CP35 only.
If you want to change the control voltage BASE LINE voltage to UP or DOWN, you patch -6V or 6V to OUTPUTS connector, you can change the control voltage center up to 6V and down to -6V.
This function create a new sound effects.
(some module has electric crash from outside HIGH voltage, please check and use carefully. As your own risk.)
uso
Caratteristiche
Qualità
1
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
Good Replica
Alvino 24.07.2020
The attenuators are bidirectional (this is not obvious). However there are only two each of the -6V and +6V outputs. I use the -6V output to bias my 921 Oscillator or 921A Oscillator Driver so that the control knob is closer to zero when summed with the keyboard CV. The multiples are handy.

I do wish that the voltage bias outputs were independently buffered.

Obviously there is space on the panel for more functionality, but this is supposed to be a Moog System 55 replica so not so much. Therefore instead of knocking off 2 feature stars I only knocked off 1.
uso
Caratteristiche
Qualità
0
0
Segnala un abuso

Segnala un abuso